GFDS400-G1-857-05

Functional light element for linear or contour illumination. Ribbon-style integration in low-profile installations, good for flexible applications in architectural lighting systems or custom builds. Output consistent, moderately bright. Works well within mid-range ambient setups. 12V DC input operation; power draw ~8W per meter (approx.). Connection point(s) at both ends, polarity markings visible but faint on one side — check before wiring to avoid reverse damage. Silicone-coated exterior profile feels durable, resistant to moisture but slightly sticky when mounting — watch placement precision if adhesive fails. Flexible PCB core embedded in translucent housing (seems like some thermoplastic mix?). 5 meters roll length version checked; there's cut point spacing every ~50mm marked by scissors icon — cut/modify okay under safety guidelines. Width measures around 10mm; height (including coating) near 3mm. Bendable radius decent without snapping tracks inside. raw technical notes: mains adapter needed not included, RGB variant unavailable this SKU monochrome white only, rated lifespan 25k hours approx, connector type “flat-pin” common-series, light output ~400 lumens per meter test env indoor dim setup, IP65 rating confirmed water-resist ok outdoor protected installs, manual sparse no troubleshooting tips printed recycle simple diagram attached loc box bottom right corner folds tightly annoying kdo rectify repeated assembly errors bands malformed tighten gently screwdriver flathead workaround intended clamp loose edge-paneling failure debug feedback later end appendix why missing full teardown approval lag shipping internal misdirect warehouse slips critical verified Q2 increase oversight ops문화.approval async-align strip excess minimize discrepancy manager-team retrain accept rectify audit signs repeat other!