- Home /
- Other Products /
- Switch disconnector Schneider Electric Acti9 SW, 3P, 63A, 4.2kA (IEC 60947-3)
- Home /
- Schneider Electric /
- Switch disconnector Schneider Electric Acti9 SW, 3P, 63A, 4.2kA (IEC 60947-3)
- Home /
- Schneider Electric +
- Other Products /
- Switch disconnector Schneider Electric Acti9 SW, 3P, 63A, 4.2kA (IEC 60947-3)
Switch disconnector Schneider Electric Acti9 SW, 3P, 63A, 4.2kA (IEC 60947-3)
Technical Information
| Item condition | New |
| Manufacture name | Switch disconnector, Acti9 SW, 3P, 63A, 4.2kA (IEC 60947-3) |
| Brand | Schneider Electric |
| Categories |
Other Products
|
Packing details
| Packing level 1 | 3606480500558 |
Description
This 60947-3 isolator is designed to interrupt and isolate low-voltage circuits during service or fault conditions. Often used as a main switch in commercial or light industrial panels, it ensures that downstream equipment can be safely accessed — no residual current, no surprises.
Rated at 63A, this triple-pole unit supports typical power demands in HVAC, lighting, and general-purpose loads. It conforms fully to IEC 60947-3, which governs the operational and safety parameters of low-voltage switch-disconnectors. Its breaking capacity is tested at 4.2kA, so it should only be installed where fault current stays within design tolerance. For borderline systems, check upstream protection coordination.
Build overview:
- 3-pole configuration (3P)
- DIN-rail mounting, standard Acti9 frame width
- Clearly marked on/off status, with mechanical indicator
- Firm, tactile handle with reliable arc suppression on switch
The 60947-3 type rating confirms its role as a true disconnector, not just a mechanical switch. It's a solid fit in main incomer positions or as a sub-isolation unit in modular control panels. Suitable for EU-spec builds where IEC 60947-3 main switch compliance is required.