Register to unlock your exclusive B2B prices and start shopping. Sign up now!
Wireless single-phase energy meter
Order only
Price (excl. VAT):
79,19 €
EAN: 4010312311059
MPN: 30000308
Package: 1
Estimate delivery time at our warehouse (approx.):
2-4 weeks
Technical Information
| Item condition | New |
| Manufacture name | Wireless single-phase energy meter |
| Brand | ELTAKO |
| Categories |
Bus System Devices (KNX/Modbus)
|
| Country of origin | CN |
| Harmonized System Code | 8526 9200 00 |
| Model | Other |
| Connection type | Direct |
| S0 impulse interface | None |
| Accuracy class | 1 |
Packing details
| Packing level 1 | 4010312311059, 4010312311059 |
| Packing level 2 | 4010312311059 |
| Packing level 3 | 4010312311059 |
Other Technical data
| Bus system KNX | No |
| Bus system radio frequent | Yes |
| Bus system Powernet | No |
| Tariff switch | No |
| Reactive power | No |
| Approved according to PTB | No |
| Other bus systems | None |
| Bus system LON | No |
| Bus system KNX radio | No |
| Radio frequent bidirectional | No |
Downloads
Description
Wireless single-phase energy meter, maximum current 65A. Only 0.5 watt standby loss. Modular device for DIN-EN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. This single-phase energy meter measures active energy by means of the current between input and output and transmits the current power and meter reading over the Eltako wireless network. Accuracy class B (1%). Evaluation and smart link via Smart Home-Controller. The internal power consumption of max. 0.5 watt active power is not metered. Like all meters without declaration of conformity (e.g. MID), this meter is not permitted for billing. 1 phase conductor with a max. current up to 65A can be connected. If the anticipated load exceeds 50%, maintain an air gap of ½ pitch unit to the devices mounted adjacently. If necessary, use spacer DS12. The inrush current is 40mA. The consumption is saved to a non-volatile memory and is immediately available again after a power failure. Wireless telegrams: A telegram is transmitted within 60 seconds if the power status changes by min. 10 percent. A change in meter reading is transmitted immediately. A full telegram comprising meter reading and power status is transmitted every 10 minutes. When the power supply is switched on, a teach-in telegram is sent to teach in the associated energy consumption indicator. If the L input and the L output were interchanged when hooked up, a normal rate (HT)/off-peak (NT) switchover telegram is transmitted to indicate the hook-up error.