FLOODLIGHT SENSOR 50 W 4000 K SYM 100 S BK

This component is an LED driver designed to regulate electrical current for low-voltage LEDs in indoor lighting systems. It ensures stable power delivery and optimal performance by converting AC mains voltage to a controlled DC output tailored to the requirements of connected LED modules. ### Electrical Specifications Input Voltage: Accepts standard mains supply within the range of 220–240V AC, 50/60 Hz. Output Voltage: Variable DC output from 3–40V, depending on load requirements. Current Regulation: Delivers constant voltage or constant current up to a maximum rated capacity of 700mA. Efficiency Class: High efficiency under typical usage conditions—exceeds basic compliance standards set for non-dimmable drivers in residential and commercial indoor applications. ### Physical Characteristics Enclosure Type: Compact plastic housing suitable for integration into modular fixtures or standalone installations; dimensions approximately 97mm x 43mm x 30mm (LxWxH). Wiring Interface: Screw terminals on input/output sides, compatible with stranded or solid wire connectors up to specified gauge limits—check datasheet before installation. Mounting Option: Surface-mounted installation recommended; comes without brackets but supports third-party mounting solutions if secured properly. ### Notes / Limitations - Max ambient operating temperature at steady full load is +50°C; risk of thermal shutdown beyond this point. - Non-dimmable design; unsuitable for applications requiring PWM or TRIAC dimming control systems. - Avoid direct connection outside specified current range to prevent overloading LEDs and rapid degradation. - Inrush current approx ~25A @230V upon startup—verify upstream switchgear ratings before deployment in circuits with limited surge tolerance.