Registreeru, et avada oma eksklusiivsed B2B hinnad ja alustada ostlemist. Registreeru kohe!
Wall mounted heat recovery unit with enthalpy heat exchanger
Ainult telli
Hind (ilma KM-ta):
2 183,91 €
EAN: 8010300109114
MPN: 0000010911
Pakend: 1
Hinnanguline tarneaeg meie laos: 3-6 weeks
Technical Information
| Toote seisukord | Uus |
| Tootja nimi | Wall mounted heat recovery unit with enthalpy heat exchanger |
| Bränd | VORTICE |
| Kategooriad |
Room Fans
|
| Harmoneeritud süsteemi kood | 8415 8300 00 |
| Laius | 712 mm |
| Kõrgus | 845 mm |
| Sügavus | 455 mm |
| Liikumisanduriga | No |
| Ühendus | Kanali ots |
| Energiatõhususklass | A |
| Sobib liikumisandurile | Yes |
| Kere materjal | Muul viisil |
| Mootori liik | Electronically commutated (EC) |
| Elektriühendus | Kaabel |
| Talitlus äpiga | No |
| With internal carbon dioxide (CO2) sensor | Yes |
| With pressure sensor | No |
| With external carbon dioxide (CO2) sensor | No |
| Suitable for (extra) carbon dioxide (CO2) sensor | No |
| With internal humidity (RH) sensor | No |
| With external humidity (RH) sensor | No |
| Suitable for (extra) humidity (RH) sensor | Yes |
| Suitable for (extra) pressure sensor | No |
| With wired control unit | Yes |
| Suitable for wired control unit | Yes |
| With zone controller | No |
| Suitable for zone controller | No |
| Max. air volume at 50 Pa | 350 m³/h |
| Max. air volume at 100 Pa | 315 m³/h |
| Max. air volume at 150 Pa | 300 m³/h |
| Max. air volume at 200 Pa | 270 m³/h |
| Max. air volume at 250 Pa | 245 m³/h |
| Max. air volume at 300 Pa | 220 m³/h |
| Kiiruse juhtimise liik | 3 sätet |
| Kanali nimiläbimõõt | 150 mm |
| Koos traadita kaugjuhtimisega | No |
| Imemisühenduste arv | 2 |
| Tagantühendus | No |
| Sisendvõimsus vastavalt EPN standardile | 165 kW |
| Sobib juhtmevabaks kaugjuhtimiseks | No |
| Sobib juhitud ventilatsiooni nõuetele | Yes |
Pakendamise üksikasjad
| Pakkimistase 1 | 8010300109114 |
Kirjeldus
Plastic (PPE) fire-resistant enclosure (DIN EN 13501). Brackets for wall-mounted installation supplied as standard.
Front panel made of plastic resin, integrating covers for filters direct access.
Round duct connection ports, nominal diameter 150 mm.
2 EC (brushless) motors, external rotor, with shaft turning in ball bearings to grant a “maintenance free” functioning, each coupled to a backward curved centrifugal impeller; 2 speeds, independently adjustable at the installation.
Enthalpy heat exchanger.
Automatic frost-protection to prevent icing on the heat exchanger.
Automatic, 100% filtered, mechanic by-pass, granting people comfort in the rooms in mid-season or when the outside temperature does not require the action of the heat exchanger.
Wired control panel with LCD display, which allows: to switch on / off the unit, the first set-up, to set the speed, to set the weekly timer, to show time and room temperature, to monitor the correct product operation (any faults are shown on the display), to show the filters status.
2 M5 filters (F7 filter for air supply duct available as optional), easy access for periodic maintenance.
Condense water tray with discharge pipes.
Possibility of connection to environmental external sensors (available as optional), for automatic functioning control.