Registreeru, et avada oma eksklusiivsed B2B hinnad ja alustada ostlemist. Registreeru kohe!
VIGIREX RH197M 220-240VAC 50/60/400HZ
Laos: Ei
Hankija laovaru: Ei
Minimaalne tellimuse kogus: 1
Hind (ilma KM-ta):
285,11 €
EAN: 3606480359743
MPN: 56517
Pakend: 1
Hinnanguline tarneaeg meie laos (umbes):
Päringu alusel
Technical Information
| Toote seisukord | Uus |
| Tootja nimi | VIGIREX RH197M 220-240VAC 50/60/400HZ |
| Bränd | Schneider Electric |
| Kategooriad |
Monitoring Relays
|
| Päritoluriik | IT |
| Harmoneeritud süsteemi kood | 8536 4900 00 |
| Funktsioon | Kolmefaasilisele toitele |
| Võimalik on vigade registreerimine | No |
| Vooluerinevuse näit | No |
| Rakendusvoolutugevus 1 | 0-30 mA |
| Rakendusvoolutugevus 2 | 0-30000 mA |
| Normaalselt suletud kontaktide arv | 1 |
Pakendamise üksikasjad
| Pakkimistase 1 | 3606480359743 |
Muud tehnilised andmed
| Laius | 54 mm |
| Kõrgus | 97 mm |
| Sügavus | 74 mm |
| Nimisagedus | 50-400 Hz |
| Eemaldatavate klambritega | No |
| Elektriühenduse liik | Kruviühendus |
| Tunnuspinge | 230 V |
| Juhtahelate tunnus-toitepinge, AC 50 Hz | 220-240 V |
| Juhtahelate tunnus-toitepinge, AC 60 Hz | 220-240 V |
| Suurim lubatud viivitus sisselülitamisel | 4.5 s |
| Minimaalne seadistatav sisselülitusviivitus | 0 s |
| Aktiveerimispinge liik | AC |
| Normaalselt avatud kontaktide arv | 1 |
| Ümberlülituskontaktide arv | 1 |
Kirjeldus
RH197M is a DIN rail mounting residual current protection relay. It protects against people direct or indirect contact, property fire hazards and motors. It measures the earth leakage current in an electrical installation via its associated toroid. It trips the associated circuit breaker when the set residual operation current is overrun. The operational supply voltage is from 220 VAC to 240 VAC 50/60Hz. The current sensitivity is selectable with 19 thresholds from 30 mA to 30 A. The time delay is selectable with 7 settings from instantaneous to 4.5s. The alarm is set by Dip switch at 50% or 100% of IDn. A switch make the selection between local manual reset or automatic reset after a fault clearance. The monitored distribution system voltage is up to 1000 VAC 50/60/400 Hz. It is installed on a DIN-rail inside a switchboard and the protection degree is IP40. It must be associated with a compatible Schneider Electric toroid. It is installed on a DIN-rail inside a switchboard and the protection degree is IP40. It must be associated with a compatible Schneider Electric type A toroid or rectangular sensor.