Technical Information
| Toote seisukord |
Uus |
| Tootja nimi |
SIPLUS S7-1500 F-DI 16x24VDC -30 ... +60 °C with conformal coating |
| Bränd |
Siemens
|
| Kategooriad |
PLC Units & I/O Modules
|
| Päritoluriik |
DE |
| Harmoneeritud süsteemi kood |
8538 9091 00
|
| Digitaalsisendite arv |
16 |
| Digitaalväljundite arv |
0 |
| Toitepinge liik |
DC |
| Väljundvool |
0 A |
| Digitaalväljundi tüüp |
Puudub |
| Toitepinge DC |
19.2-28.8 V |
| Konfigureeritavad digitaalsisendid |
Yes |
| Konfigureeritavad digitaalväljundid |
No |
Pakendamise üksikasjad
| Pakkimistase 1 |
4047618072018 |
Muud tehnilised andmed
| Laius |
35 mm |
| Kõrgus |
147 mm |
| Sügavus |
129 mm |
| Signaali 1 sisendvool |
3.7 mA |
| Sobib ohutusfuktsiooniks |
Yes |
| Viivitus signaali muutumisel |
0.4-20 ms |
| Sisendpinge liik |
DC |
| Liiasus |
No |
| Saadaval on lühisekaitsega väljundid |
No |
| Plahvatuskindluse kategooriga gaasikeskkonnas |
ATEX 1 -gaasi plahvatuskaitse, Cat. 3G |
| Plahvatuskindluse kategooriga tolmukeskkonnas |
Puudub |
| Täiendav talitlusagent (Ex ia) |
No |
| Täiendav talitlusagent (Ex ib) |
No |
| Omadused vastavalt standardile EN ISO 13849-1 |
Tase e |
| Lubatud pinge sisendis |
-30-30 V |
| Ohutuse üldtase vastavalt standardile IEC 61508 |
3 |
Kirjeldus
SIPLUS S7-1500 F-DI 16x24 V DC based on 6ES7526-1BH00-0AB0 with conformal coating, -30…+60 °C, F digital input module, 35 mm overall width; up to PL E (ISO13849-1)/ SIL 3 (IEC 61508) SIMATIC ET 200MP is a modular and scalable I/O system with IP20 for universal use, and offers the same system advantages as the S7-1500. It permits the shortest bus cycle times and fastest response times, even with large volumes of data. The distributed I/O system is particularly easy to install, wire, and commission. Thanks to its scalable design, you can gear the IO station exactly to the on-site requirements. Just like the CPU, the digital input modules are also protected against extreme ambient conditions. Due to the 100% conformal coating they can withstand biologically, chemically and physically active substances, condensation, frost, and corrosive gases. Regardless of the conditions, your digital signals are reliably recorded.