SIMATIC S7-1500 DI 16x24VDC HF 35 mm, with operating mode counter
Technical Information
| Toote seisukord | Uus |
| Tootja nimi | I/O module SIMATIC S7-1500 DI 16×24V DC HF with counter |
| Bränd | Siemens |
| Kategooriad |
PLC Units & I/O Modules
|
| Päritoluriik* | DE |
| * The actual country of origin may differ depending on the delivery batch. To confirm the specific country of origin, please contact your account manager. | |
| Harmoneeritud süsteemi kood | 8538 9091 00 |
| Digitaalsisendite arv | 16 |
| Digitaalväljundite arv | 0 |
| Toitepinge liik | DC |
| Väljundvool | 0 A |
| Digitaalväljundi tüüp | Puudub |
| Toitepinge DC | 19.2-28.8 V |
| Konfigureeritavad digitaalsisendid | Yes |
| Konfigureeritavad digitaalväljundid | No |
Pakendamise üksikasjad
| Pakkimistase 1 | 4025515080138 |
Muud tehnilised andmed
| Laius | 35 mm |
| Kõrgus | 147 mm |
| Sügavus | 129 mm |
| Signaali 1 sisendvool | 2.5 mA |
| Sobib ohutusfuktsiooniks | No |
| Viivitus signaali muutumisel | 0.05-20 ms |
| Sisendpinge liik | DC |
| Liiasus | No |
| Saadaval on lühisekaitsega väljundid | No |
| Plahvatuskindluse kategooriga gaasikeskkonnas | ATEX 1 -gaasi plahvatuskaitse, Cat. 3G |
| Plahvatuskindluse kategooriga tolmukeskkonnas | Puudub |
| Täiendav talitlusagent (Ex ia) | No |
| Täiendav talitlusagent (Ex ib) | No |
| Lubatud pinge sisendis | -30-30 V |
Kirjeldus
SIMATIC S7-1500, digital input module DI 16x24 V DC HF, 16 channels in groups of 16; of which 2 inputs as counters can be used; input delay 0.05..20 ms; input type 3 (IEC 61131); diagnostics; hardware interrupts: front connector (screw terminals or push-in) to be ordered separately SIMATIC ET 200MP is a modular and scalable I/O system with IP20 for universal use, and offers the same system advantages as the S7-1500. It permits the shortest bus cycle times and fastest response times, even with large volumes of data. The distributed I/O system is particularly easy to install, wire, and commission. Thanks to its scalable design, you can gear the IO station exactly to the on-site requirements. The scalable configuration of an ET 200MP station is ensured by the wide range of signal modules. A large number of digital and analog input and output modules are available. This ensures the universal applicability of the system.