Registreeru, et avada oma eksklusiivsed B2B hinnad ja alustada ostlemist. Registreeru kohe!
Residual current monitoring relay, VigiPacT RH99P, 30mA-30A, 12/24VAC 50/60Hz, 12/48VDC, front panel mounting
Ainult telli
Hind (ilma KM-ta):
399,67 €
EAN: 3303430562900
MPN: 56290
Pakend: 1
Hinnanguline tarneaeg meie laos (umbes):
Päringu alusel
Technical Information
| Toote seisukord | Uus |
| Tootja nimi | Residual current monitoring relay, VigiPacT RH99P, 30mA-30A, 12/24VAC 50/60Hz, 12/48VDC, front panel mounting |
| Bränd | Schneider Electric |
| Kategooriad |
Monitoring Relays
|
| Päritoluriik | FR |
| Funktsioon | Kolmefaasilisele toitele |
| Võimalik on vigade registreerimine | No |
| Vooluerinevuse näit | No |
| Rakendusvoolutugevus 1 | 0-30 mA |
| Rakendusvoolutugevus 2 | 0-30000 mA |
| Normaalselt suletud kontaktide arv | 1 |
Pakendamise üksikasjad
| Pakkimistase 1 | 3303430562900 |
Muud tehnilised andmed
| Laius | 72 mm |
| Kõrgus | 72 mm |
| Sügavus | 78 mm |
| Nimisagedus | 50-60 Hz |
| Eemaldatavate klambritega | No |
| Elektriühenduse liik | Klõpsühendus |
| Tunnuspinge | 12-48 V |
| Juhtahelate tunnus-toitepinge, AC 50 Hz | 12-24 V |
| Juhtahelate tunnus-toitepinge, AC 60 Hz | 12-24 V |
| Juhtahelate tunnus-toitepinge, DC | 12-48 V |
| Suurim lubatud viivitus sisselülitamisel | 4.5 s |
| Minimaalne seadistatav sisselülitusviivitus | 0 s |
| Aktiveerimispinge liik | AC |
| Normaalselt avatud kontaktide arv | 1 |
| Ümberlülituskontaktide arv | 1 |
Allalaadimised
ECOP (Keskkonna hea tava kood)
EPD deklaratsioon (Keskkonnatoote deklaratsioon)
Tehniline käsiraamat
Kirjeldus
VigiPacT RH99P is a DIN rail mounting residual current monitoring relay. It monitor drops in electrical insulation due to ageing of cables or extensions in the installation. It measures the earth leakage current in an electrical installation via its associated toroid. A control signal is issued by the relay when the residual-current operating threshold is overrun. The operational supply voltage is 12/24VAC 50/60Hz, or 12/48VDC. It is a type A earth-leakage protection class. The current sensitivity is selectable with 9 thresholds from 30 mA to 30 A. The time delay is selectable with 9 settings from instantaneous to 4.5s. There is an automatic reset after a fault clearance. The monitored distribution system voltage is up to 1000 VAC 50/60/400 Hz. It is installed on a front panel switchboard and the protection degree is IP40. It must be associated with a compatible Schneider Electric type A toroid or rectangular sensor.