Registreeru, et avada oma eksklusiivsed B2B hinnad ja alustada ostlemist. Registreeru kohe!
REFLEX iC60N Ti24 25 A 3P C MCB+CONTROL
Ainult telli
Hind (ilma KM-ta):
194,43 €
EAN: 3606480455650
MPN: A9C62325
Pakend: 1
Karp: 14
Hinnanguline tarneaeg meie laos (umbes):
4-6 weeks
Technical Information
| Toote seisukord | Uus |
| Tootja nimi | ***Reflex iC60N 3P C 25A, 24, 10kA |
| Bränd | Schneider Electric |
| Kategooriad |
Kaitselülitid
|
| Päritoluriik* | ES |
| * The actual country of origin may differ depending on the delivery batch. To confirm the specific country of origin, please contact your account manager. | |
| Harmoneeritud süsteemi kood | 8536 2010 00 |
| Tunnusvool | 25 A |
| Tunnuspinge | 415 V |
| Vabasti tunnusjoon | C |
| Pooluste arv | 3 |
| Tunnus-lahutusvõime lühisel EN 60898 | 0 kA |
| Tunnus-lahutusvõime lühisel IEC 60947-2 | 10 kA |
Pakendamise üksikasjad
| Pakkimistase 1 | 3606480455650 |
| Pakkimistase 2 | 3606480455658 |
Muud tehnilised andmed
| Pinge liik | AC |
| Sisseehitussügavus | 44.5 mm |
| Voolupiirangu klass | 0 |
| Liigpinge kategooria | 4 |
| Saasteaste | 3 |
| Laius mooduli arvudes | 5.5 |
| Kaitseaste (IP) | IP20 |
| Samaaegselt lülitatakse N-neutraaljuhti | No |
| Abiseadme lülitusvool | 1 A |
| Nimipinge, abiseade | 230 V |
| Juhtpinge tüüp, abiseadmed | AC |
| Lisavarustuse paigaldamine tarnimisel | Kaugjuhtimisajam |
Kirjeldus
This Acti 9 Reflex iC60N is a low voltage integrated control circuit breaker. It is a 3P circuit-breaker with 3 protected poles, 25A rated current and C tripping curve. It can be mounted on DIN rail for modular installation. Its width is 11 modules of 9mm. As circuit-breaker, its breaking capacity, according to IEC/EN 60947-2, is 20kA at 220VAC to 240VAC, and 10kA at 380VAC to 415VAC. As circui-breaker, it protects circuits against short circuit and overload currents, disconnection in the industrial sector. It can control a device remotely by latched and/or impulse-type order according to the 3 operating modes to be chosen by the user. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. It becomes IP40 once in modular enclosure with insulation class II. Resetting after a fault is performed manually by the resetting handle. The Ti24 interface allows direct interfacing of the Reflex iC60 with a PLC. It allows to execute remote control, to indicate the state of the control circuit and circuit-breaker state information, to connect it to the Acti 9 Smartlink thanks to the prefabricated cables.