Registreeru, et avada oma eksklusiivsed B2B hinnad ja alustada ostlemist. Registreeru kohe!
Powerline sensor input 230V image 1
ELTAKO

Powerline sensor input 230V

Laos: Ei Hankija laovaru: Ei Minimaalne tellimuse kogus: 1
Hind (ilma KM-ta):
90,55 €
Hind kehtib kuni 31.12.25
EAN: 4010312316740
MPN: 31100007
Pakend: 1
Hinnanguline tarneaeg meie laos (umbes): 2-4 weeks

Technical Information

Toote seisukord Uus
Tootja nimi Powerline sensor input 230V
Bränd ELTAKO
Kategooriad Bus System Devices (KNX/Modbus)
Päritoluriik CN
Harmoneeritud süsteemi kood 8526 9200 00
Paigaldusviis Süvistatud paigaldus (krohvi)
Mudel Muul viisil
Siinisüsteem KNX No
Muud siinisüsteemid Puudub

Pakendamise üksikasjad

Pakkimistase 1 4010312316740, 4010312316740
Pakkimistase 2 4010312316740
Pakkimistase 3 4010312316740

Muud tehnilised andmed

Sisendite arv 1
Raadiosageduslik siinisüsteem No
Siinisüsteem Powernet Yes
Siinisüsteem LON No
Siinisüsteem KNX radio No

Allalaadimised

Toote lehe süvalink

Kirjeldus

Powerline sensor input with 1 channel. 53x43mm, 25mm deep for mounting in 58mm switch boxes. Sensor input 230V. Standby loss only 0,5 watt. To control and switch at different places. When pressed, the sensor input acts on all actuators with the same address or as a central pushbutton if element address 0 is used. Two rotary switches are located on the front for address assignment: The left rotary switch defines the group address g with 16 alphabetical values from A to P. The right rotary switch defines the element address e with 16 numerical values from 0 to 15. Above it is a slide switch which acts as a configuration switch with positions 0, 1 and 2. Position 0: Sensor input with reset function as pushbutton. Position 1: Sensor input functions as NO contact. Position 2: A change-over switch is evaluated as a pushbutton. All entries and configurations can also be accessed via the mains using the PC software SIENNA Professional. To the left of the rotary switches is a red LED which indicates all activities. Next to it is a reset pushbutton and to the right of that is a service pin. For functions, please refer to the operating instructions. The terminals located above are plug-in terminals for conductor cross-sections of 0.2 mm² to 1.5 mm².