Registreeru, et avada oma eksklusiivsed B2B hinnad ja alustada ostlemist. Registreeru kohe!
OVERSTR.BEV.REL. 5..25A 100..120VAC image 1
Schneider Electric

OVERSTR.BEV.REL. 5..25A 100..120VAC

Laos: Ei Hankija laovaru: Ei Minimaalne tellimuse kogus: 1
Hind (ilma KM-ta):
110,08 €
Hind kehtib kuni 31.12.25
EAN: 8809755436353
MPN: LR97D25F7
Pakend: 1
Hinnanguline tarneaeg meie laos (umbes): Päringu alusel

Technical Information

Toote seisukord Uus
Tootja nimi OVERSTR.BEV.REL. 5..25A 100..120VAC
Bränd Schneider Electric
Kategooriad Electronic Overload Protection
Päritoluriik KR
Harmoneeritud süsteemi kood 8536 4900 00
Juhtahelate tunnus-toitepinge, AC 50 Hz 100-120 V
Voolu seadistuspiirkond 5-25 A

Pakendamise üksikasjad

Pakkimistase 1 8809755436353

Muud tehnilised andmed

Paigaldusviis Vahetu kinnitamine
Normaalselt avatud abikontaktide arv 0
Normaalselt suletud abikontaktide arv 0
Ümberlülituvate abikontaktide arv 1
Juhtahelate tunnus-toitepinge, AC 60 Hz 100-120 V
Vabasti klass Reguleeritav
Peaahela ühendusviis Kruviühendus
Aktiveerimispinge liik AC
Ennistusfunktsiooni sisend Yes
Automaatne ennistusfunktsioon Yes
Nupplülitiga ennistusfunktsioon Yes

Kirjeldus

TeSys LR97D electronic overcurrent relay, 25A/690V, to be supplied with 100-120V AC, for protection of motors with a rated current 5-21A. It provides 3 dials to adjust the protection, LOAD (5-25A) for the overcurrent level, O-TIME (0.3-10sec) for the acceptable duration of the overcurrent, D-TIME (0.5-30sec) for the starting duration. In addition, the device trips when the current is higher than 3 x LOAD during more than 0.5sec in steady state and if there is a missing phase during more than 3sec. The settings include selectors for 1-phase/3-phase motors and manual/automatic reset, and the device has a reset button, a test/stop button, 2 LED indicators (Run/Trip), 2 auxiliary contacts 1NO/NC for fault signalling. Settings can be locked by sealing the transparent cover. For direct attachement to the bottom terminals of a 3-pole contactor LC1D09-D38, with screw clamp terminals on bottom, the separate mounting from the contactor is possible using the terminal block LAD7B106 (to be ordered separately). Multi-standards certified (IEC, UL, CSA, CCC, EAC), compliant RoHs/Reach.