Technical Information
| Toote seisukord |
Uus |
| Tootja nimi |
MR-DIO4/2-IP65 Modbus RTU 230 V |
| Bränd |
METZ CONNECT
|
| Kategooriad |
Bus System Devices (KNX/Modbus)
|
| Päritoluriik* |
DE |
|
* The actual country of origin may differ depending on the delivery batch.
To confirm the specific country of origin, please contact your account manager.
|
| Harmoneeritud süsteemi kood |
8517 6200 00
|
| Paigaldusviis |
Pinnapealne |
| Sisendite arv |
4 |
| Tunnus-talitluspinge |
230 V |
| Siinisüsteem KNX |
No |
| Raadiosageduslik siinisüsteem |
No |
| Siinisüsteem Powernet |
No |
| Siiniühendusega |
Yes |
| Kaugtalitlus on võimalik |
Yes |
| Ethernet |
No |
| Vajalik on väline signaalipinge |
No |
| Muud siinisüsteemid |
Muul viisil |
| Siinisüsteem LON |
No |
| C-koormus |
No |
| LED juhtimine |
Yes |
| Eri faaside ühendamine |
No |
| Lokaaljuhtimine/käsijuhtimine |
No |
| Lülitusfunktsiooniga |
Yes |
| Kaitseaste (IP) |
IP65 |
| LED näidikuga |
No |
| Siinisüsteem KNX radio |
No |
Pakendamise üksikasjad
| Pakkimistase 1 |
4251122197390, 4251122197390 |
Kirjeldus
The Modbus module inan IP65 housing with 4 digital inputs and 2 relay outputs with manual control was developed for decentralized switching tasks. It is suitable for accommodating, for example, light switches and window contacts in a room, switching two light strips or controlling louvers. It can also be used to control 2 motorized fire dampers. In this case it is necessary to protect the relay contacts by appropriate load-dependent measures. The inputs have to be connected to potentialfree contacts. The inputs and outputs can be switched and scanned by means of standard registers via a Modbus master. Module address, bit rate and parity are set with two rotary switches. Bit rate and parity are also set by software.