Registreeru, et avada oma eksklusiivsed B2B hinnad ja alustada ostlemist. Registreeru kohe!
LED Luminaire with Strip - 1x50W 150cm 8000lm 4000K UGR<21 IP65 - Sensor
Ainult telli
Hind (ilma KM-ta):
82,59 €
EAN: 8720246202465
MPN: 2400296
Pakend: 1
Hinnanguline tarneaeg meie laos (umbes):
2-4 weeks
Technical Information
| Toote seisukord | Uus |
| Tootja nimi | LED Luminaire with Strip - 1x50W 150cm 8000lm 4000K UGR |
| Bränd | Shada |
| Kategooriad |
Seina- ja laevalgustid
Laele paigaldatavad valgustid |
| Päritoluriik | CN |
| Laius | 75 mm |
| Kere värvus | Hall |
| Värviesitusindeks | 80-89 (klass 1B) |
| Pikkus | 1500 mm |
| Kõrgus/sügavus | 75 mm |
| Lamp | LED, mittevahetatav |
| Löögikindlus | IK08 |
| Nimipinge | 220-240 V |
| Kaitseaste (IP) | IP65 |
| Valgusvoo nurk | Eriti lai valgusvoo nurk >80° |
| Süsteemi võimsus | 50 W |
Pakendamise üksikasjad
| Pakkimistase 1 | 8720246202465 |
Muud tehnilised andmed
| Kaitseklass | I |
| Pinge liik | AC |
| Liikumisanduriga | Yes |
| Juhtliidese tüüp | Pole vajalik |
| Valgustusanduriga | Yes |
| Sobib ripp-paigalduseks | No |
| Kere materjal | Plast |
| Kattematerjal | Muul viisil |
| Lambiga | No |
| Sobib sisseehitatud paigalduseks | No |
| Sobib pindpaigalduseks | No |
| Nimivool | 240 mA |
| Valguse värvus | Valge |
| Tunnus-eluiga, L70/B50 at 25 °C | 50000 h |
| Tunnus-eluiga, L80/B10 at 25 °C | 30000 h |
| Värvi konsistents (McAdam'i ellips) | SDCM5 |
| Summaarne harmooniline moonutus | 20 |
| Fotobioloogiline ohutus standardi EN 62471 järgi | RG0 |
| Tunnus-ümbrustemperatuur IEC62722-2-1 järgi | -25-40 °C |
| Süttivuskatse IEC 60695-2-11järgi | 850 °C - 30 s |
| Reguleerimine, 0-10 V | Yes |
| Reguleerimine, 1-10 V | No |
| Reguleerimine, DALI | No |
| Reguleerimine, DMX | No |
| Reguleerimine potentsiomeetriga, (sisseehitatud) | No |
| Reguleerimine, GPRS | No |
| Reguleerimine, LineSwitch | No |
| Reguleerimine, tootja süsteemi | No |
| Reguleerimine, peaahela pinge modulatsiooni | No |
| Reguleerimine, faasi väljalülitamine | No |
| Reguleerimine, faasi sisselülitamine | No |
| Reguleerimine, programmeeritav | No |
| Reguleerimine; RF (raadiaosagedus) | No |
| Reguleerimine, siinuslaine redutseerimine | No |
| Reguleerimine, puutetundlik | No |
| Reguleerimine, Zigbee | No |
| Reguleerimine surunupuga | No |
| Reguleerimisfunktsioon puudub | No |
| Valguse hajutaja | Muul viisil |
| Sisseehitatud vahetatava lambi energiatõhususe klass | C |
| Vahetatava lambi suurim energiatõhususe klass | C |
| Vahetatava lambi väikseim energiatõhususe klass | C |
| Unified Glare Ratio (UGR) | 21 |
| Max. number of luminaires per miniature circuit breaker B16 | 32 |
| Sobib lakke paigaldamiseks | Yes |
| Võimsustegur | 0.9 |
Kirjeldus
The LED TL Luminaire with strip gives a beautiful uniform light, which is perfect for workplaces, garages, sheds, and smaller warehouses.
The light source is incorporated in the fixture and emits a neutral white light that is flicker-free. The lamp includes a sensor and the following functions can be adjusted using either the remote control (S2400296_4) (not included) or manually:
The aluminum clamps are made of stainless steel and ensure that the LED module is pressed tightly against the housing, making the luminaire dust tight and waterjet protected. Besides that, the LED module is attached to the housing with a strip making it together with the push terminals a luminaire that is very easy and quick to install.
In addition, the luminaire is delivered with rubbers of multiple sizes that ensure that almost every cable size can be used for installation and the module and Tridonic driver are easy to replace, ensuring a long lifespan.
The light source is incorporated in the fixture and emits a neutral white light that is flicker-free. The lamp includes a sensor and the following functions can be adjusted using either the remote control (S2400296_4) (not included) or manually:
- Detection area: reduce or increase the maximum detection range
- Hold time: adjust for how long the luminaire will stay on once movement is detected
- Standby period: set up how long it takes for the luminaire to turn off completely when there is no more movement.
- Daylight sensor: set up at which luminous flux per unit area the luminaire turns on
The aluminum clamps are made of stainless steel and ensure that the LED module is pressed tightly against the housing, making the luminaire dust tight and waterjet protected. Besides that, the LED module is attached to the housing with a strip making it together with the push terminals a luminaire that is very easy and quick to install.
In addition, the luminaire is delivered with rubbers of multiple sizes that ensure that almost every cable size can be used for installation and the module and Tridonic driver are easy to replace, ensuring a long lifespan.