Registreeru, et avada oma eksklusiivsed B2B hinnad ja alustada ostlemist. Registreeru kohe!
HCC/S2.1.2.1 Heating/Cooling Circuit Controller, 2-f, 0-10 V, man. op., MDRC
Laos: Ei
Hankija laovaru: Ei
Minimaalne tellimuse kogus: 1
Hind (ilma KM-ta):
944,98 €
tk kohta
EAN: 4016779011631
MPN: 2CDG110220R0011
Pakend: 1
Hinnanguline tarneaeg meie laos (umbes):
Päringu alusel
Technical Information
| Toote seisukord | Uus |
| Tootja nimi | HCC/S2.2.1.1 Heating/Cooling Circuit Controller, 2-fold, 3-point, MDRC |
| Bränd | ABB |
| Kategooriad |
Bus System Devices (KNX/Modbus)
|
| Harmoneeritud süsteemi kood | 8537 1091 00 |
| Paigaldusviis | DRA (DIN liistule) |
| Väljundite arv | 4 |
| Suurim väljundvool | 5 A |
| Siinisüsteem KNX | Yes |
| Raadiosageduslik siinisüsteem | No |
| Muud siinisüsteemid | Puudub |
| Parandusmuutuja consistent | Yes |
| Lülituse korrektsioon Correcting variable switching | No |
| Kaitseklapifunktsioon Valve protection function | Yes |
| Käsitsi aktiveerimine | No |
Pakendamise üksikasjad
| Pakkimistase 1 | 4016779011631 |
Muud tehnilised andmed
| Suurim lülitusvool (aktiivkoormus) | 5 A |
| Siinisüsteem Powernet | No |
| Siiniühendusega | Yes |
| Digitaalsisendite arv | 0 |
| Laius mooduli arvudes | 8 |
| Siinisüsteem LON | No |
| Lülituspinge | 230 V |
| Kaitseaste (IP) | IP20 |
| Siinisüsteem KNX radio | No |
| Raadiosageduslik, kahesuunaline | No |
| Eemaldatav siini moodul | No |
| Sisseehitatud paigalduskarbi vähim sügavus | 64.5 mm |
Allalaadimised
Kirjeldus
For the control of a heating or cooling circuit. The device has 2 channels, each with two electronic outputs to control a motor-driven mixing valve (3-Point) of a heating or cooling circuit as well as a relay output (5A) to switch the pump of the circuit. Via 3 binary inputs it is possible to monitor the status of the pump (via potential free contacts) and integrate these feedback into the control of the pump. The flow and return flow temperature are measured and used for the calculation of the control value for the valve output in the integrated controller. The set point temperature is received via the KNX bus. By bundling both channels of the device it is also possible to use it for double pump systems
The device supports the ABB i-bus Tool for advanced diagnosis and improved commissioning.