Technical Information
| Toote seisukord |
Uus |
| Tootja nimi |
RS485 bus telegram duplicator |
| Bränd |
ELTAKO
|
| Kategooriad |
Bus System Devices (KNX/Modbus)
|
| Päritoluriik |
CN |
| Harmoneeritud süsteemi kood |
8526 9200 00
|
| Paigaldusviis |
DRA (DIN liistule) |
| Sisendite arv |
60 |
| Väljundite arv |
60 |
| Siinisüsteem KNX |
No |
| Siiniühendusega |
Yes |
| Laius mooduli arvudes |
1 |
| Muud siinisüsteemid |
Muul viisil |
Pakendamise üksikasjad
| Pakkimistase 1 |
4010312315705, 4010312315705 |
| Pakkimistase 2 |
4010312315705 |
| Pakkimistase 3 |
4010312315705 |
Muud tehnilised andmed
| Raadiosageduslik siinisüsteem |
Yes |
| Siinisüsteem Powernet |
No |
| Siinisüsteem LON |
No |
| Lokaaljuhtimine/käsijuhtimine |
No |
| Kaitseaste (IP) |
IP20 |
| Siinisüsteem KNX radio |
No |
Allalaadimised
Kirjeldus
Telegram duplicator for the Eltako RS485 bus with exchangeable antenna. Only 0.5 watt standby loss. Modular device for DIN-EN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. Connection to the Eltako-RS485 bus. Bus cross wiring and power supply with jumper. Operation in conjunction with FAM14 or FTS14KS. The telegrams of taught-in IDs are duplicated and directly sent into the Eltako wireless network with a new output ID. These wireless telegrams can be specifically taught-in in decentralized actuators. A total of 120 memory locations are available. The upper rotary switch is used to selectively transmitting a wireless telegram. In normal operation, it is set to RUN. The bottom rotary switch is used for teaching-in and deleting IDs. In normal operation, it is set to RUN. The red LED below the upper rotary switch performs during the teaching-in process. The green LED below the lower rotary switch lights up briefly when a wireless telegram is transmitted. The enclosed small antenna can be replaced with a wireless antenna FAG55E- or FA250 with magnetic base and cable.