Registreeru, et avada oma eksklusiivsed B2B hinnad ja alustada ostlemist. Registreeru kohe!
Switching power supply unit 12V/12W
Ainult telli
Hind (ilma KM-ta):
32,37 €
EAN: 4010312315095
MPN: 30014062
Pakend: 1
Hinnanguline tarneaeg meie laos (umbes):
4-6 weeks
Technical Information
| Toote seisukord | Uus |
| Tootja nimi | Switching power supply unit 12V/12W |
| Bränd | ELTAKO |
| Kategooriad |
AC/DC Power Supply Units
|
| Päritoluriik* | CN |
| * The actual country of origin may differ depending on the delivery batch. To confirm the specific country of origin, please contact your account manager. | |
| Harmoneeritud süsteemi kood | 8504 3180 00 |
| Laius | 18 mm |
| Kõrgus | 58 mm |
| Sügavus | 58 mm |
| Toitepinge liik | AC |
| Väljundvõimsus | 12 W |
| Võimalik paigaldada liistule | Yes |
| Seinale paigaldamine on võimalik | No |
| 1. sekundaarne väljundpinge | 12 V |
| Nimitoitepinge vahelduvvoolu 50 Hz korral | 230 V |
| Maksimaalne väljundvool 1 | 1 A |
Pakendamise üksikasjad
| Pakkimistase 1 | 4010312315095, 4010312315095 |
| Pakkimistase 2 | 4010312315095 |
| Pakkimistase 3 | 4010312315095 |
Muud tehnilised andmed
| Laius | 18 mm |
| Sobib DIN paigalduspaneelidele | Yes |
| Sobib ohutusfuktsiooniks | No |
| Laius mooduli arvudes | 1 |
| Stabiliseeritud väljundpinge | Yes |
| Elektriühenduse liik | Kruviühendus |
| Stabiliseeritud | Yes |
| Kaitseaste (IP) | IP20 |
| Kohe paigaldatav | No |
| Reguleeritav teisene pinge | No |
| Lühisekindel | Yes |
| Väljundpinge 1 nimiväärtus | 12 V |
Allalaadimised
Kirjeldus
Switching power supply unit rated capacity 12W. Standby loss 0.2 watt only. Modular devices for DIN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. If the total power demand of a Series 14 bus system is higher than 8W, other switching power supply units FSNT14-12V/12W are required. These are each supplying a group of actuators, which are separated with a disconnecting link on the FSNT14. The scope of delivery includes 1 disconnecting link TB14 1 module, 1 jumper 1.5 modules and a spacer DS14. At a load of more than 50% of the rated capacity and always if there are adjacent switching power supply units and dimmers a ventilation clearance of 1/2 module must be maintained with the spacers DS14. Therefore, this and a long jumper are included to the dimmers. Input voltage 230V (-20% bis +10%). Efficiency 83%. Stabilised output voltage ±1%, low residual ripple. Short-circuit proof. Overload protection and over-temperature switch-off by means of swichting off with automatic switching-on after fault clearance (autorecovery function). This switching power supply unit can also be used for producing a redundancy. Therefore only 1 FSNT14 should be plugged in parallel to the integrated power supply units into the FAM14 and FTS14KS and connected to a normal jumper. For an optimal load distribution, the FSNT14 should be placed as close as possible next to the last bus actuator.