Registreeru, et avada oma eksklusiivsed B2B hinnad ja alustada ostlemist. Registreeru kohe!
Wireless receiver antenna module image 1
ELTAKO

Wireless receiver antenna module

Laos: Ei Hankija laovaru: Ei Minimaalne tellimuse kogus: 1
Hind (ilma KM-ta):
79,11 €
Hind kehtib kuni 31.12.25
EAN: 4010312313848
MPN: 30014016
Pakend: 1
Hinnanguline tarneaeg meie laos (umbes): 2-4 weeks

Technical Information

Toote seisukord Uus
Tootja nimi Wireless receiver antenna module
Bränd ELTAKO
Kategooriad Bus System Devices (KNX/Modbus)
Päritoluriik CN
Harmoneeritud süsteemi kood 8526 9200 00
Siinisüsteem KNX No
Siinisüsteem Powernet No
Muud siinisüsteemid Puudub
Siinisüsteem LON No
Siinisüsteem KNX radio No

Pakendamise üksikasjad

Pakkimistase 1 4010312313848, 4010312313848
Pakkimistase 2 4010312313848
Pakkimistase 3 4010312313848

Muud tehnilised andmed

Paigaldusviis Pinnapealne
Raadiosageduslik siinisüsteem Yes
Kinnitusviis Muul viisil
Laius mooduli arvudes 0
Raadiosageduslik, kahesuunaline Yes

Allalaadimised

Toote lehe süvalink

Kirjeldus

Wireless receiver antenna module for the RS485 sub-bus. Only 0.5 watt standby loss. SMA socket for small enclosed antenna. The reception range can be increased by placing a larger wireless antenna FA250*, FA200* or FAG55E- in the optimised position. Housing dimensions LxWxH: 78x40x22mm. Up to three wireless receiver modules in a separate mini-housing can be installed at any point in the building in addition to an FAM14 and connected via a Gateway FGW14 to the main bus by a 4-wire screened sub-bus line (e.g. telephone line). Therefore connect the terminals RSA/RSB of the FEM with the terminals RSA2/RSB2 of the FGW14 . Also connect the terminals +12V/GND of the FEM with the terminals +12V/GND of the FGW14. Wiring of several FEM should take place with a line in the form of a chain, as prescribed in RS485 bus systems. A radial wiring with one line per FEM is not ­allowed. In each of the three wireless receiver modules, the jumper must be plugged into a different position. For this purpose, carefully open the housing on the narrow side with a screwdriver at the side provided. Blade width 6.5mm, max. 1.5mm thick.