Technical Information
| Toote seisukord |
Uus |
| Tootja nimi |
DCS btn I/F 2-g Door communication |
| Bränd |
Gira
|
| Kategooriad |
Door Entry Systems
|
| Päritoluriik* |
DE |
|
* The actual country of origin may differ depending on the delivery batch.
To confirm the specific country of origin, please contact your account manager.
|
| Harmoneeritud süsteemi kood |
8542 3190 00
|
| Funktsioon |
Laienda |
Pakendamise üksikasjad
| Pakkimistase 1 |
4010337210009 |
| Pakkimistase 2 |
4010337210009 |
Muud tehnilised andmed
| Laius |
0 mm |
| Kõrgus |
0 mm |
| Sügavus |
0 mm |
| Paigaldusviis |
Kogumislattsüsteem |
| Laius mooduli arvudes |
0 |
Kirjeldus
DCS button interface, 2-gang Features: The DCS button interface, 2-gang is used to implement a zero-voltage button signal on the Gira door communication BUS. The DCS button interface has two mutually independent inputs for the connection of zero-voltage buttons. The inputs can either be used for triggering a switching action (e.g. switching lights) via a switching actuator or flush-mounted switching actuator, or it can be assigned to a home station. The DCS button interface is intended for installation in a device box behind a conventional button. Notes : The button is connected via a 3.wire connection line which is approx. 20 cm long. This connection line can be extended to a maximum of 5 m. If the button interface is assigned to a home station, the two inputs have differing functions: Input 1 triggers a floor call. This input is required when only a two-wire cable is available for connecting a home station including the floor-call button (e.g. when retrofitting an existing door intercom). Input 2 triggers a door call. This input is required when the automatic door opener of the home station is to be triggered via a mechanical button.