Technical Information
| Toote seisukord |
Uus |
| Tootja nimi |
Connected single switch, base, 10 A, 71 x 71 mm, screw fixing, Zigbee® |
| Bränd |
Niko
|
| Kategooriad |
Bus System Devices (KNX/Modbus)
|
| Päritoluriik* |
CN |
|
* The actual country of origin may differ depending on the delivery batch.
To confirm the specific country of origin, please contact your account manager.
|
| Harmoneeritud süsteemi kood |
8536 2010 00
|
| Siinisüsteem KNX |
No |
| Siiniühendusega |
No |
| Siinisüsteem LON |
No |
| Siinisüsteem KNX radio |
No |
| Raadiosageduslik, kahesuunaline |
No |
Pakendamise üksikasjad
| Pakkimistase 1 |
5413736368392 |
Muud tehnilised andmed
| Paigaldusviis |
Süvistatud paigaldus (krohvi) |
| Tunnusvool |
10 A |
| Väljundvõimsus |
2300 W |
| Tunnus-talitluspinge |
230 V |
| Raadiosageduslik siinisüsteem |
No |
| Siinisüsteem Powernet |
No |
| Suurim lülitusvool |
100 A |
| Muud siinisüsteemid |
NHC |
| C-koormus |
No |
| Eri faaside ühendamine |
No |
| Lokaaljuhtimine/käsijuhtimine |
Yes |
| Kaitseaste (IP) |
IP20 |
| LED näidikuga |
Yes |
| Laiendusmoodulitega |
No |
| Eemaldatav siini moodul |
No |
| Sisseehitatud paigalduskarbi vähim sügavus |
40 mm |
Allalaadimised
Kirjeldus
The connected single Zigbee® switch has a switching contact to switch lighting. It contains a transmitter and receiver that can communicate wirelessly with the wireless smart hub for Niko Home Control (552-00001). You can use the connected single switch to replace a conventional switch. It is equipped with an extension terminal so that, in combination with a conventional push button, it can easily replace multiway or intermediate switching. Please note that you cannot add a LED lighting unit to the conventional push button when you use it as an extension to Zigbee® connected devices. The connected single switch can switch its own contact. Once connected to the wireless smart hub for Niko Home Control (552-00001), it is possible to configure additional functionalities with the Niko Home Control programming software. For example, you can add the switch to a scene or all-off function. This device can also be used in a bus wiring installation in combination with the wireless bridge for Nik