Registreeru, et avada oma eksklusiivsed B2B hinnad ja alustada ostlemist. Registreeru kohe!
CM-MPS.21P Three-phase monitoring relay 2c/o, 0,0.1-30s, L1-L2-L3-N=3x180-280VAC
Ainult telli
Hind (ilma KM-ta):
362,17 €
tk kohta
EAN: 4016779852081
MPN: 1SVR740885R4300
Pakend: 1
Hinnanguline tarneaeg meie laos (umbes):
Päringu alusel
Technical Information
| Toote seisukord | Uus |
| Tootja nimi | CM-MPS.23P Three-phase monitoring relay 2c/o, 0,0.1-30s, L1-L2-L3-N=3x180-280VAC |
| Bränd | ABB |
| Kategooriad |
Monitoring Relays
|
| Harmoneeritud süsteemi kood | 8536 4900 00 |
| Pinge mõõteulatus | 180-280 V |
| Faasijärjestuse seire | Yes |
| Faaside ebasümmeetria jälgimine | Yes |
| Elektriühenduse liik | Vedruklamber ühendus |
| Normaalselt suletud kontaktide arv | 0 |
Pakendamise üksikasjad
| Pakkimistase 1 | 4016779852081 |
Muud tehnilised andmed
| Laius | 22.5 mm |
| Kõrgus | 85.6 mm |
| Sügavus | 103.7 mm |
| Eemaldatavate klambritega | No |
| Faasirikke jälgimine | Yes |
| Alapinge tuvastusfunktsioon | Yes |
| Liigpinge tuvastusfunktsioon | Yes |
| Juhtahelate tunnus-toitepinge, AC 50 Hz | 180-280 V |
| Juhtahelate tunnus-toitepinge, AC 60 Hz | 180-280 V |
| Suurim lubatud viivitus sisselülitamisel | 0.2 s |
| Minimaalne seadistatav sisselülitusviivitus | 0.2 s |
| Suurim lubatud väljalülitusviivitus | 30 s |
| Minimaalne seadistatav väljalülitusviivitus | 0.1 s |
| Aktiveerimispinge liik | AC |
| Normaalselt avatud kontaktide arv | 0 |
| Ümberlülituskontaktide arv | 2 |
Allalaadimised
Kirjeldus
The CM-MPN.23S is a multifunctional relay from the CM three-phase monitors range. It operates with a rated control supply voltage / three-phase measuring voltage of 180-280 V AC 50/60/400 Hz and has a 2 c/o (SPDT) output with contacts rated at 250 V / 4 A. This relay is also suitable to monitor single-phase mains. It monitors all phase parameters such as over/undervoltage, phase unbalance, phase failure as well as an interrupted neutral. The corresponding threshold values are adjustable. The CM-MPN.23S also offers selection of phase sequence monitoring, automatic phase sequence correction as well as an ON or OFF tripping delay. The output contacts can be configured as 1x2 c/o (SPDT) contacts (common signal) or 2x1 c/o (SPDT) contact (separate signal for over- and undervoltage thresholds) operation. The tripping delay is adjustable over a range of instantaneous to 30 s (0, 0.1-30 s). A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers maintenance free Easy Connect Technology with push-in terminals.