Technical Information
| Toote seisukord |
Uus |
| Tootja nimi |
Analog input 2 way |
| Bränd |
EATON
|
| Kategooriad |
Bus System Devices (KNX/Modbus)
|
| Päritoluriik |
CZ |
| Harmoneeritud süsteemi kood |
8541 4900 00
|
| Siinisüsteem KNX |
No |
| Raadiosageduslik siinisüsteem |
Yes |
| Siinisüsteem Powernet |
No |
| Siiniühendusega |
Yes |
| Muud siinisüsteemid |
xComfort |
| Siinisüsteem LON |
No |
| Siinisüsteem KNX radio |
No |
Pakendamise üksikasjad
| Pakkimistase 1 |
4015081117987 |
| Pakkimistase 2 |
9008790091148 |
Muud tehnilised andmed
| Paigaldusviis |
Muul viisil |
| Mudel |
Põhimoodul |
| Sisendite arv |
2 |
| Ajami sisendpinge |
Yes |
| Sisendpingega juhtimine |
Yes |
| Laius mooduli arvudes |
2 |
| Kaitseaste (IP) |
IP20 |
| LED näidikuga |
Yes |
| Sisseehitatud paigalduskarbi vähim sügavus |
0 mm |
Kirjeldus
The 2-fold analog inputs can record different measurement values (e.g.: air quality, humidity, wind direction, etc.) using universal sensors (0-10VDC, 0-20mA, 4-20mA) or the temperature (PT1000 sensor, 265643) and provide the comfortable electrical installation. The supply is carried out via a separate 24VDC power supply unit (110772 or 110773, not included as standard!!!). The 24VDC supply is fed through 2-fold at the analog input and is therefore available for supplying the active sensors. depending on the sensors connected, the correct settings must be carried out for each channel. Notice: check the load and correct supply of the sensors!!! Notice: for the precise measurement and displaying of the values, use a reference measuring device to record the offset and adjust the zOffsetz in MFR. The device is mounted in the junction or installation box. Attention!: Does not work with xComfort Bridge