moisture-proof diffuser luminaire

LED moisture-proof diffuser luminaire with IP64 protection rating and drip-edge effect for minimising dirt and collection of dust for maximum hygienic requirements. Solution for mounting directly on the TECTON IP64 rail in white. Luminaire input power: 40.4 W, Slave luminaire for DALI control (DALI only) with LED converter; patented InvisiClick for clipless mounting and opening of the cover. Cover and basic diffuser made of impact-resistant polycarbonate, temperature- and UV-resistant, made as a single injection-moulded piece. LED service life lasts 100000 h before luminous flux is reduced to 95% of the initial value. Chromaticity tolerance (initial MacAdam): 3. Luminaire luminous flux: 6230 lm, Luminaire efficacy: 154 lm/W. Colour rendering Ra > 80, colour temperature 4000 K. Luminaire with symmetric wide light distribution (wide beam). High quality direct/indirect lighting concept for optimum lighting solutions in parking garages and industrial applications. Tool-free mechanical and electrical installation on the TECTON IP64 mounting rail via two lateral levers. 100% flexible positioning over the entire length of the continuous row. ambient temperature: -20°C to +30°C. Approved for indoor use with vertical or horizontal wall mounting (see installation instructions). Note: please contact your consultant if you are planning to use the luminaire in environments with chemical pollutants, high or condensing humidity and major variations in temperature. Permissible for use in environments where the deposition of conductive dust on the luminaire can be expected (EN 60598-2-24). Protection class: SC1, 850 °C glow-wire tested. Luminaire wired with halogen-free leads, silicone-free, Impact strength: IK03, Dimensions: 1611 x 92 x 178 mm; weight: 4.79 kg.