Register to unlock your exclusive B2B prices and start shopping. Sign up now!
Impulse switch with tungsten pre-contact, 1 NO contact 16A
In stock: No
Vendor stock: No
Minimal order quantity: 1
Price (excl. VAT):
47,43 €
EAN: 4010312206744
MPN: 21100801
Package: 1
Estimate delivery time at our warehouse (approx.):
2-4 weeks
Technical Information
| Item condition | New |
| Manufacture name | Impulse switch with tungsten pre-contact, 1 NO contact 16A |
| Brand | ELTAKO |
| Categories |
Relays
|
| Country of origin | CN |
| Harmonized System Code | 8536 4900 00 |
| Mounting method | DIN rail |
| Function | Electronic switch |
| Control voltage 1 | 8-230 V |
| Type of control voltage 1 | AC/DC |
| Rated switch current | 16 A |
| Number of contacts as normally open contact | 1 |
Packing details
| Packing level 1 | 4010312206744, 4010312206744 |
| Packing level 2 | 4010312206744 |
| Packing level 3 | 4010312206744 |
Other Technical data
| Built-in depth | 58 mm |
| Width in number of modular spacings | 1 |
| Control voltage 2 | 230 V |
| Type of control voltage 2 | AC |
| Frequency control voltage 1 | 50 Hz |
| Frequency control voltage 2 | 50 Hz |
| Suitable for manual operation | No |
| Max. switching current (cos phi = 0.6) | 4 A |
| Max. incandescent lamp load | 3300 W |
| Max. load fluorescent lamp | 1000 VA |
| Max. load fluorescent lamp (Duo circuit) | 1000 VA |
| Max. load fluorescent lamp (parallel compensated) | 500 VA |
| Number of contacts as normally closed contact | 0 |
| Number of contacts as change-over contact | 0 |
Downloads
Description
1 NO contact potential free 16A/250V AC with tungsten pre-contact. 230V LED lamps up to 600W, incandescent lamp load up to 3300W. Max. inrush current 500A/2ms. No standby loss. Modular device for DIN-EN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. State-of-the-art hybrid technology combines advantages of nonwearing electronic control with high capacity of special relays. With the patented Eltako Duplex technology (DX) the normally potential-free contacts can still switch in zero passage when switching 230V AC 50Hz and therefore drastically reduce wear. Simply connect the neutral conductor to the terminal (N) and L to 1(L) for this. This gives a standby consumption of only 0.1 Watt. Universal control voltage 8 to 230V UC. Low switching noise. No permanent power supply necessary, therefore no standby loss. By using a bistable relay coil power loss and heating are avoided even in the on mode. The relay contact can be open or closed during start-up. It is synchronised at first operation. The electronics does not have an internal power supply and therefore no power is consumed in any contact position. A control current flows only during a short control impulse of 0.2 seconds. This activates the microcontroller, reads the last switching state from the non-voltage memory, switches the bistable relay to its opposite state accordingly and rewrites the new switching state to memory.