Register to unlock your exclusive B2B prices and start shopping. Sign up now!
Multifunction impulse switch with integrated relay function, 1 + 1 NO contacts 10A
In stock: No
Vendor stock: No
Minimal order quantity: 1
Price (excl. VAT):
42,82 €
EAN: 4010312108079
MPN: 61200301
Package: 1
Estimate delivery time at our warehouse (approx.):
4-6 weeks
Technical Information
| Item condition | New |
| Manufacture name | Multifunction impulse switch with integrated relay function, 1 + 1 NO contacts 10A |
| Brand | ELTAKO |
| Categories |
Relays
|
| Country of origin | CN |
| Harmonized System Code | 8536 5080 00 |
| Mounting method | Flush mounted (plaster) |
| Function | Other |
| Control voltage 1 | 8-230 V |
| Type of control voltage 1 | AC |
| Voltage type of supply voltage | AC/DC |
| Supply voltage | 230 V |
| Rated switch current | 16 A |
| Number of contacts as normally open contact | 2 |
Packing details
| Packing level 1 | 4010312108079, 4010312108079 |
| Packing level 2 | 4010312108079 |
| Packing level 3 | 4010312108079 |
Other Technical data
| Built-in depth | 58 mm |
| Control voltage 2 | 10-230 V |
| Type of control voltage 2 | DC |
| Frequency control voltage 1 | 50 Hz |
| Frequency control voltage 2 | 50 Hz |
| Suitable for manual operation | No |
| Max. switching current (cos phi = 0.6) | 8 A |
| Max. incandescent lamp load | 2000 W |
| Max. load fluorescent lamp | 1000 VA |
| Max. load fluorescent lamp (Duo circuit) | 1000 VA |
| Max. load fluorescent lamp (parallel compensated) | 500 VA |
| Number of contacts as normally closed contact | 0 |
| Number of contacts as change-over contact | 0 |
Downloads
Description
1+1 NO contacts potential free 10A/250V AC. 230V LED lamps up to 200W, incandescent lamp load up to 2000W. No standby loss. For installation. 45mm long, 45mm wide, 32mm deep. State-of-the-art hybrid technology combines advantages of nonwearing electronic control with high capacity of special relays. Universal control voltage 8 to 230V UC. No permanent power supply necessary, therefore no standby loss. By using bistable relays coil power loss and heating is avoided even in the on mode. The switched consumer may not be connected to the mains before the short automatic synchronisation after installation has terminated. The functions of the second rotary switch are preselected using the rotary switch ES/ER. The setting ER selects the function in brackets. 10 different functions are selectable. 2S = Impulse switch with 2 NO contacts. (2R) = Switching relay with 2 NO contacts. WS = Impulse switch with 1 NO contact and 1 NC contact. (WR) = Switching relay with 1 NO contact and 1 NC contact. SS1 = Impulse multi circuit switch 1+1 NO contacts for switching sequence 0 - contact 1 (1-2) - contact 2 (3-4) - contacts 1+2. (RR) = Switching relay (closed-circuit current relay) with 2 NC contacts. SS2 = Impulse multi circuit switch 1+1 NO contacts for switching sequence 0 - contact 1 - contacts 1+2 - contact 2. (EW) = Impulse relay for fleeting NO contact with 1 NO contact and 1 NC contact, wiping time 1 sec. GS = Impulse group switch 1+1 NO contacts for switching sequence 0 - contact 1 - 0 - contact 2. (GR) = Group relay 1+1 NO contacts (relay with alternating closing contacts). This relay is not suitable to feed back the switching voltage signal of a dimmer switch. Use only relays ESR12DDX-UC, ESR12NP-230V+UC or ESR61NP-230V+UC for this purpose. The electronics does not have an internal power supply and therefore no power is consumed in any contact position. A control current flows only during a short control impulse of 0.2 seconds. This activates the microcontroller, reads the last switching state from the non-voltage memory, switches the bistable relay to its opposite state accordingly and rewrites the new switching state to memory.