ESB40-40N-06 Installation Contactor (NO) 40 A - 4 NO - 0 NC - 230 V - Control Circuit 400 Hz
Technical Information
| Item condition | New |
| Manufacture name | ESB40-40N-06 Installation Contactor (NO) 40 A - 4 NO - 0 NC - 230 V - Control Circuit 400 Hz |
| Brand | ABB |
| Categories |
Assembly Accessories and Parts
|
| Country of origin* | CN |
| * The actual country of origin may differ depending on the delivery batch. To confirm the specific country of origin, please contact your account manager. | |
| Harmonized System Code | 8536 5080 00 |
| Rated operating voltage | 220-400 V |
| Voltage type (excitation voltage) | AC/DC |
| Voltage type (operating voltage) | AC/DC |
| Degree of protection (IP) | IP20 |
| Rated operation current | 40 A |
| Rated excitation voltage | 230 V |
Packing details
| Packing level 1 | 4013614524820, 4013614518515, 4013614518515 |
| Packing level 2 | 4013614539213 |
Other Technical data
| Built-in depth | 58 mm |
| Width in number of modular spacings | 0 |
| Utility category | 7 |
| Slider for hand switch | No |
| Additional equipment possible | Yes |
| Number of contacts as normally closed contact | 0 |
| Number of contacts as normally open contact | 4 |
| Hum-free | Yes |
| With day/night function | No |
Downloads
Description
This component operates as a circuit protection device in electrical systems, designed to interrupt current flow during overloads or short circuits. It ensures system stability and prevents damage to connected equipment by creating a break in the circuit when fault conditions occur. ### Electrical Specifications Rated voltage: Compatible for low-voltage systems up to specified limits (check datasheet). Interrupting capacity: Designed for medium-scale industrial loads; verify application suitability. ### Mechanical Details Mounting configuration: DIN rail mountable, ensuring compatibility with standard enclosures. Material properties: Insulated housing for added safety—built to comply with IEC standards. Handle material is rated for wear resistance but should be inspected periodically. - Ensure the component matches the intended voltage rating before installation. - Check ambient temperature ratings—it may derate under high heat conditions. - Confirm mechanical fit on older DIN rails—some variance between brands occurs. - Reset mechanism tolerates limited manual resets; do not exceed without inspection.
