Pressure sensor XMLG 0–1bar 4–20mA G1/4A 24V
Technical Information
| Item condition | New |
| Manufacture name | Pressure sensor XMLG 0–1bar 4–20mA G1/4A 24V |
| Brand | Telemecanique |
| Categories |
Pressure Sensors
|
| Country of origin | CH |
| Switch off pressure | 0-1 bar |
| Bursting pressure | 3 bar |
| Engaging pressure | 0-1 bar |
| Suitable as 2-point controller | No |
| Suitable as limiter | No |
| Suitable as guard | Yes |
| Max. test pressure | 2.7 bar |
| Medium temperature | -15-125 °C |
| Pressure-switching differential | 0 bar |
Packing details
| Packing level 1 | 3389110969511 |
| Packing level 2 | 3389110969519 |
Other Technical data
| Width | 0 mm |
| Height | 58.1 mm |
| Depth | 48.5 mm |
| With display | No |
| Diameter | 22.8 mm |
| Rated operation power at AC-3, 400 V | 0 kW |
| Number of normally open contacts as main contact | 0 |
| Number of normally closed contacts as main contact | 0 |
| Number of auxiliary contacts as normally open contact | 0 |
| Number of auxiliary contacts as normally closed contact | 0 |
| Rated operation current Ie at AC-3, 400 V | 0 A |
| Rated operation current Ie at AC-1, 400 V | 0 A |
| With manual on/off switch | No |
| Switching capacity at AC-3, 240 V | 0 kA |
| Initial setting | 0-1000 hPa |
| End setting | 0-1000 hPa |
| Number of auxiliary contacts as change-over contact | 0 |
| Type of electric connection | Other |
| Explosion-proof | No |
| Degree of protection (IP) | IP66 |
| Initial value measuring range pressure | 0 Pa |
| Rated voltage Ue at DC | 24 V |
| Electronic version | Yes |
| End value measuring range pressure | 0 Pa |
| With hand operation | No |
| Degree of protection (NEMA) | Other |
| Max. operating pressure | 0 hPa |
| Thread size | Other |
Downloads
Description
This XMLG electronic pressure sensor has a a pressure rating of 1 bar, a M12 connector electrical connection and a G 1/4 a DIN 3852-e male fluid connection. This pressure transmitter sensor is designed for accurate pressure control of fresh water (0°C-125°C), hydraulic oils and corrosive fluids between -15°C and 125°C. It is fixed directly on tubage. It has a ceramic Al2O3 (Aluminium Oxide) cell and a stainless steel (AISI 303) body, this makes it compatible with corrosive non alkaline fluids. 10 million cycles mechanical durability for minimum required maintenance on your pressurized fluid circuits. It complies with EN/IEC 61326-2-3, CSA C22.2 No.14, UL 508, EAC. Well suited for a wide range of fluid types and applications from hydraulic and pneumatic installations to water pumps and machine tooling.