EIFE Ethernet module full kit - for MTZ2/MTZ3 drawout
Technical Information
| Item condition | New |
| Manufacture name | EIFE Ethernet module full kit - for MTZ2/MTZ3 drawout |
| Brand | Schneider Electric |
| Categories |
Industrial Fieldbus Modules
|
| Width | 51 mm |
| Height | 51 mm |
| Depth | 52.5 mm |
| Voltage type of supply voltage | DC |
| Rail mounting possible | Yes |
| Degree of protection (IP) | IP20 |
| Rack-assembly possible | Yes |
| Wall mounting/direct mounting | No |
| IO link master | No |
| Supply voltage DC | 24 V |
Packing details
| Packing level 1 | 3606480986291 |
| Packing level 2 | 3606480986299 |
Other Technical data
| Suitable for safety functions | No |
| Supporting protocol for LON | No |
| Supporting protocol for TCP/IP | Yes |
| Supporting protocol for ASI | No |
| Supporting protocol for PROFIBUS | No |
| Supporting protocol for CAN | No |
| Supporting protocol for INTERBUS | No |
| Supporting protocol for KNX | No |
| Supporting protocol for Modbus | No |
| Supporting protocol for Data-Highway | No |
| Supporting protocol for DeviceNet | No |
| Supporting protocol for SUCONET | No |
| Supporting protocol for other bus systems | No |
| With potential separation | No |
| Explosion safety category for gas | None |
| Explosion safety category for dust | None |
| Fieldbus connection over separate bus coupler possible | No |
| System accessory | Yes |
| Appendant operation agent (Ex ia) | No |
| Appendant operation agent (Ex ib) | No |
| Supporting protocol for SERCOS | No |
| Supporting protocol for INTERBUS-Safety | No |
| Front built-in possible | No |
| Radio standard Bluetooth | No |
| Radio standard Wi-Fi 802.11 | No |
| Performance level according to EN ISO 13849-1 | Level c |
| Supporting protocol for AS-Interface Safety at Work | No |
| Supporting protocol for DeviceNet Safety | No |
| Supporting protocol for EtherNet/IP | No |
| Supporting protocol for Foundation Fieldbus | No |
| Supporting protocol for PROFINET CBA | No |
| Supporting protocol for PROFINET IO | No |
| Supporting protocol for PROFIsafe | No |
| Supporting protocol for SafetyBUS p | No |
| Radio standard GPRS | No |
| Radio standard GSM | No |
| Radio standard UMTS | No |
| SIL according to IEC 61508 | None |
Downloads
Description
This EIFE is an embedded Ethernet interface module designed for MasterPact MTZ2/3 drawout circuit breakers. It provides a single Ethernet access and gets all data delivered by Masterpact MTZ2/3 control unit. It monitors the three positions of the circuit breaker when inserted in its chassis (IN, OUT, TEST). The data flow is 10/100 Mbps for a simple daisy chain connection. The connection to EIFE interface requires a ULP communication port installed on the chassis of MasterPact MTZ2/3. The EIFE is mounted on MasterPact MTZ2/3 chassis DIN rail, and is connected to the ULP port by an ULP cable (supplied). The EIFE power supply is provided by the ULP port through the ULP cable. There are two RJ45 sockets for the connection to Ethernet network. The EIFE is entirely part of the EcoStruxure Power architecture and Ethernet ready smart panels. The EIFE firmware can be updated using EcoStruxure Power Commission software.