Downlights Sonnos Lens White around ETDD 11W 800lm 90 Flood (FL) IK06 3 SDCM

Compact LED downlight with round construction. Recessed downlight for flush plastering in plastered gypsum ceilings. Ceiling cut-out dimensions Ø 68 mm. Recess depth >= 90 mm, Luminaire height 83 mm. With white-coated plastic reflector. Symmetric light distribution characteristic and beam spread: 36° Flood. Light control via collimator-/lens technology. Direct glare limitation in accordance with UGR 19. With one LED module. Luminaire luminous flux 800 lm, Connected load 11,0 W, luminous efficiency of luminaire 73 lm/W. Light colour neutral white, correlated colour temperature (CCT) 4000 K, general colour rendering index (CRI) Ra= 90. Colour locus tolerance (initial MacAdam) ≤ 3 SDCM corresponds to very high colour uniformity of the LEDs in application. Nominal service life L90 (tq 25 °C) = 50,000 h, nominal service life L80 (tq 25 °C) = 100,000 h. The light source is replaceable according to the ecodesign requirements (VO (EU) 2019/2020). Permissible ambient temperature (ta): -20°C - +25°C. Housing and heat sink made of die-cast aluminium. Safety class (EN 61140): II, protection rating (DIN EN 60529): IP20. Protection rating on room side: IP54. Impact resistance level in accordance with IEC 62262: IK06, testing temperature of wire glow test in accordance with IEC 60695-2-11: 850 °C. With 5-pole connection terminal to 1.5 mm². Mains connection of control unit is with a connection terminal. With electronic ballast, digitally dimmable (DALI). Control gear unit according to DALI-2 standard (EN 62386). Luminaire is switchable and dimmable by means of touch functionality via DALI control terminals (Touch DIM). (CCT) 2700-6500 K Possible dimming range: 1...100%. The control gear unit is replaceable in accordance with the ecodesign requirements (VO (EU) 2019/2020). Live-Link ready. The corresponding ceiling mounting ring for rimless integration in plastered gypsum ceilings must be ordered separately. The luminaire complies with fundamental requirements of applicable EU regulations and product safety legislation and bears the CE symbol. The luminaire is also ENEC-certified by an independent testing authority. For workstations with computer screens. Offices, Corridors, Foyers, Conference rooms, Retail areas, waiting zones.