Technische Informationen
| Artikelzustand |
Neu |
| Herstellername |
Wind sensor with 0-10 V interface and heating, polar white |
| Marke |
Schneider Electric
|
| Kategorien |
KNX- & Modbus-Geräte
|
| Code des Harmonisierten Systems |
9025 8040 00
|
| ETIM |
EC000926
|
| Modell |
Windsensor |
| KNX-Bussystem |
Nein |
| Funk-Bussystem |
Nein |
| Powernet-Bussystem |
Nein |
| Sonstige Bussysteme |
Nein |
| LON-Bussystem |
Nein |
| KNX-Funk-Bussystem |
Nein |
| Bidirektionaler Funk |
Nein |
Verpackungsdetails
| Verpackungsstufe 1 |
3606485012124 |
| Verpackungsstufe 2 |
3606485012122 |
Weitere technische Daten
| Befestigungsart |
Aufputzmontage (Putz) |
| Farbe |
Weiß |
| Mit Heizung |
Ja |
| Analogeingang |
Nein |
| RAL-Nummer (ähnlich) |
9010 |
| Wetterstation |
Nein |
| Schutzart (IP) |
IP65 |
| Mit DCF77 |
Nein |
| Akustisches Signal |
Nein |
Downloads
Beschreibung
Wind sensor with 0-10 V interface and heating. The wind sensor evaluates the wind speed and converts it into an analogue 0-10 V output voltage. The integrated heater can be operated via an external power supply of AC 24 V/500 mA for trouble-free operation in frosty weather. For external installation and connection to the weather station REG-K/4-gang or the analogue input REG-K/4-gang. These two devices provide the supply voltage necessary to operate the sensor. Measuring range: 0.7-40 m/s, linear. Output: 0-10 V. External power supply: Voltage: 24 V DC (18-32 V DC). Power consumption: approx. 12 mA. Heating: 24 V DC/AC PTC element (80° C). Type of protection: IP 65. Load: max. 60 m/s transient. Incoming cable: 3 m, LiYY 6 x 0.25 mm². Fixing method: Mounting bracket. Mounting position: vertical. Contents: With mounting bracket. Colour: polar white.