Registrieren Sie sich, um Ihre exklusiven B2B-Preise freizuschalten und mit dem Einkauf zu beginnen. Jetzt registrieren!
Analogue settable time relay with clock generator, 1 CO contact 10A image 1

Analogue settable time relay with clock generator, 1 CO contact 10A

Nur auf bestellung
EAN: 4010312603116
MPN: 23001402
Verpackung: 1
Nettopreis
44,41 €
pro Einheit
Mindestbestellmenge: 1
Lieferzeit zu unserem Lager: 2-4 weeks
Preis gültig bis 31.12.26 oder solange der Vorrat reicht

Technische Informationen

Artikelzustand Neu
Herstellername Analogue settable time relay with clock generator, 1 CO contact 10A
Marke ELTAKO
Kategorien Beschriftungsschilder & Gehäuse
Ursprungsland* CN
* Das tatsächliche Ursprungsland kann je nach Liefercharge variieren. Um das konkrete Ursprungsland zu bestätigen, wenden Sie sich bitte an Ihren Kundenbetreuer.
Code des Harmonisierten Systems 8536 4900 00
ETIM EC001669
Befestigungsart DIN-Schiene
Funktion Einschalt-Timer mit Impuls
Erregungsart Analog mit einer Funktion
Breite in Teilungseinheiten 1
Anzahl Schalter 1
Art der Versorgungsspannung AC/DC
Versorgungsspannung 8-230 V
1. Intervalleinheit Minuten/Stunden
1. Intervall 0.1-40
Schaltvermögen Glühlampen 2000 W
Schaltvermögen Leuchtstofflampe induktiv 1000 VA
Anzahl Kontakte als Öffner 0
Anzahl Kontakte als Schließer 0

Verpackungsdetails

Verpackungsstufe 1 4010312603116, 4010312603116
Verpackungsstufe 2 4010312603116
Verpackungsstufe 3 4010312603116

Weitere technische Daten

Einbauhöhe 58 mm
Steuerspannung 1 8-230 V
Art der Steuerspannung 1 AC/DC
Frequenz der Steuerspannung 1 50 Hz
Schaltvermögen Leuchtstofflampe DUO 1000 VA
Schaltvermögen Leuchtstofflampe parallelkompensiert 500 VA

Downloads

Beschreibung

Clock generator starting with impulse, 1 CO contact potential free 10A/250V AC. 230V LED lamps up to 200W, incandescent lamps 2000W*. Standby loss 0.02-0.4 watt only. Modular devices for DIN-EN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. T1 and T2 can be set separately by a second multiplier while the time base remains the same. With the Eltako Duplex technology (DX) the normally potential-free contacts can still switch in zero passage when switching 230V AC 50Hz and therefore drastically reduce wear. Simply connect the neutral conductor to the terminal (N) and L to 15(L) for this. This gives an additional standby consumption of only 0.1 Watt. Universal control voltage 8 to 230V UC. Supply voltage same as the control voltage. Time setting between 0.1 seconds and 40 hours. By using a bistable relay coil power loss and heating is avoided even in the on mode. The switched consumer may not be connected to the mains before the short automatic synchronisation after installation has terminated. The LED below the big rotary switch indicates the contact position while time-out is in progress. It blinks while the relay contact 15-18 is open (15-16 closed), and is continuously ON as long as the relay contact 15-18 is closed (15-16 open). The time base T is selected by means of the middle, latching rotary switch T. Time-base figures available are 0.1 seconds, 0.5 seconds, 2 seconds, 5 seconds, 1 minute, 2 minutes, 5 minutes, 1 hour, 2 hours and 4 hours. The total time is obtained by multiplying the timebase by the multiplier. The multiplier xT is set on the upper, latching rotary switch xT and is in the range from 1 to 10. Thus, time settings can be selected in the range from 0.1 seconds (time base 0.1 seconds and multiplier 1) and 40 hours (time base 4 hours and multiplier 10). * The maximum load can be used starting at a delay time or clock cycle of 5 minutes. The maximum load will be reduced for shorter times as follows: up to 2 seconds 15%, up to 2 minutes 30%, up to 5 minutes 60%.