Registrieren Sie sich, um Ihre exklusiven B2B-Preise freizuschalten und mit dem Einkauf zu beginnen. Jetzt registrieren!
Potenzialtrenner PTi-F-C12 24 V AC/DC
Nur auf bestellung
EAN: 4251394629414
MPN: 1105010870
Verpackung: 1
Karton: 10
Nettopreis
58,20 €
pro Einheit
Mindestbestellmenge: 1
Lieferzeit zu unserem Lager: 4-6 weeks
Dieser Preis gilt bis zur nächsten Preisliste oder solange der Vorrat reicht
Technische Informationen
| Artikelzustand | Neu |
| Herstellername | PTi-F-C12 24 V AC/DC |
| Marke | METZ CONNECT |
| Kategorien |
Netzwerksoftware & Kommunikationsschnittstellen
|
| Ursprungsland* | DE |
| * Das tatsächliche Ursprungsland kann je nach Liefercharge variieren. Um das konkrete Ursprungsland zu bestätigen, wenden Sie sich bitte an Ihren Kundenbetreuer. | |
| Code des Harmonisierten Systems | 9030 3320 00 |
| ETIM | EC000310 |
| Galvanische Trennung | Passiv |
| Überstromschutz | Ja |
| Anschlussart Primärseite | Sonstige |
| Anschlussart Sekundärseite | Sonstige |
| Bidirektional | Nein |
Verpackungsdetails
| Verpackungsstufe 1 | 4251394629414 |
| Verpackungsstufe 2 | 4251394629414 |
Beschreibung
The potential isolator / signal converter is used for isolating analog signals in the range from 0 to 10 V DC, and 0 to 20 mA DC or for a signal conversion from 0 to 10 V DC to 0 to 20 mA DC or 0 to 20 mA DC to 0 to 10 V DC. The input and output signals as well as the supply voltage are electrically isolated from each other. An input signal from 0 to 10 V or 0 to 20 mA can be connected to the device. Electrical isolation function: With the PT-C12, the input signal 0 to 10 V is adjusted proportionally to the output signal 0 to 10 V. The PTi-C12 adjusts the input signal from 0 to 20 mA proportional to the output signal from 0 to 20 mA. Function Signal conversion with potential separation: With a signal conversion from 0 to 10 V to 0 to 20 mA, or from 0 to 20 mA to 0 to 10 V, the output signal converted thereby can be readjusted using an integrated spindle trimmer. In addition, a manual emergency operating option with a MANUAL AUTO switch with feedback contact is also integrated. The output signal from 0 to 10 V or 0 to 20 mA can be set via the front potentiometer when the switch is in the MANUAL position. A constant output voltage of max. 10 V DC and 5 mA is available at the 10 V terminal. Input Y is used for the LED display of the output voltage Ua. The brightness of the LED depends on the level of the output signal (bridge between Ua and Y). Alternatively, an external signal at the input Y can be connected to the LED display from 0 to 10 V DC.Connection with spring clamp terminal blocks (push-in)