Registrieren Sie sich, um Ihre exklusiven B2B-Preise freizuschalten und mit dem Einkauf zu beginnen. Jetzt registrieren!
Powerline sensor input 230V
Nur auf bestellung
EAN: 4010312316740
MPN: 31100007
Verpackung: 1
Nettopreis
93,56 €
pro Einheit
Mindestbestellmenge: 1
Lieferzeit zu unserem Lager: 2-4 weeks
Preis gültig bis 31.12.26 oder solange der Vorrat reicht
Technische Informationen
| Artikelzustand | Neu |
| Herstellername | Powerline sensor input 230V |
| Marke | ELTAKO |
| Kategorien |
KNX- & Modbus-Geräte
|
| Ursprungsland* | CN |
| * Das tatsächliche Ursprungsland kann je nach Liefercharge variieren. Um das konkrete Ursprungsland zu bestätigen, wenden Sie sich bitte an Ihren Kundenbetreuer. | |
| Code des Harmonisierten Systems | 8526 9200 00 |
| ETIM | EC001100 |
| Befestigungsart | Unterputzmontage (Putz) |
| Modell | Sonstige |
| KNX-Bussystem | Nein |
| Sonstige Bussysteme | Nein |
Verpackungsdetails
| Verpackungsstufe 1 | 4010312316740, 4010312316740 |
| Verpackungsstufe 2 | 4010312316740 |
| Verpackungsstufe 3 | 4010312316740 |
Weitere technische Daten
| Anzahl Eingänge | 1 |
| Funk-Bussystem | Nein |
| Powernet-Bussystem | Ja |
| LON-Bussystem | Nein |
| KNX-Funk-Bussystem | Nein |
Downloads
Beschreibung
Powerline sensor input with 1 channel. 53x43mm, 25mm deep for mounting in 58mm switch boxes. Sensor input 230V. Standby loss only 0,5 watt. To control and switch at different places. When pressed, the sensor input acts on all actuators with the same address or as a central pushbutton if element address 0 is used. Two rotary switches are located on the front for address assignment: The left rotary switch defines the group address g with 16 alphabetical values from A to P. The right rotary switch defines the element address e with 16 numerical values from 0 to 15. Above it is a slide switch which acts as a configuration switch with positions 0, 1 and 2. Position 0: Sensor input with reset function as pushbutton. Position 1: Sensor input functions as NO contact. Position 2: A change-over switch is evaluated as a pushbutton. All entries and configurations can also be accessed via the mains using the PC software SIENNA Professional. To the left of the rotary switches is a red LED which indicates all activities. Next to it is a reset pushbutton and to the right of that is a service pin. For functions, please refer to the operating instructions. The terminals located above are plug-in terminals for conductor cross-sections of 0.2 mm² to 1.5 mm².