Registrieren Sie sich, um Ihre exklusiven B2B-Preise freizuschalten und mit dem Einkauf zu beginnen. Jetzt registrieren!
Powerline repeater
Nur auf bestellung
EAN: 4010312324103
MPN: 31000030
Verpackung: 1
Nettopreis
87,14 €
pro Einheit
Mindestbestellmenge: 1
Lieferzeit zu unserem Lager: 2-4 weeks
Preis gültig bis 31.12.26 oder solange der Vorrat reicht
Technische Informationen
| Artikelzustand | Neu |
| Herstellername | Powerline repeater |
| Marke | ELTAKO |
| Kategorien |
KNX- & Modbus-Geräte
|
| Ursprungsland* | CN |
| * Das tatsächliche Ursprungsland kann je nach Liefercharge variieren. Um das konkrete Ursprungsland zu bestätigen, wenden Sie sich bitte an Ihren Kundenbetreuer. | |
| Code des Harmonisierten Systems | 8526 9200 00 |
| ETIM | EC000698 |
| Bemessungsspannung | 230 V |
| Befestigungsart | Unterputzmontage (Putz) |
| KNX-Bussystem | Nein |
| Powernet-Bussystem | Ja |
| Sonstige Bussysteme | Nein |
| LON-Bussystem | Nein |
Verpackungsdetails
| Verpackungsstufe 1 | 4010312324103, 4010312324103 |
| Verpackungsstufe 2 | 4010312324103 |
| Verpackungsstufe 3 | 4010312324103 |
Weitere technische Daten
| Funk-Bussystem | Nein |
| Schutzart (IP) | IP20 |
| KNX-Funk-Bussystem | Nein |
Downloads
Beschreibung
Powerline repeater. 53x43mm, 25mm deep for mounting in 58mm switch boxes. Standby loss only 0,5 watt. The repeater supports greater ranges. With cable lengths of >300m the repeater is normally located in a distributor between the sensor and the actuator. The repeater repeats commands from sensors with the same address g, e. Feedback messages from actuators are not repeated. Two rotary switches are located on the front to assign addresses: The left-hand rotary switch determines the group address g with 16 alphanumeric digits from A to P. The right-hand rotary switch determines the element address e with 16 numerical values. Above it is a slide switch which is a configuration switch with positions 0, 1 and 2. Position 0: Central commands are repeated irrespective of the repeater’s e address. With address g, e=0, only central commands are repeated. Position 1: With address g, e=0 at the repeater, all commands of group g are repeated. Position 2: Unassigned. All entries and configurations can also be accessed via the mains using the Sienna Professional PC software. Addresses can be changed live or without voltage. On the left of the rotary switches is a red LED to display all activities. Next to that is the Reset button and to the right of that is Service Pin (P). The terminals located above are plug-in terminals for conductor cross-sections of 0.2mm² to 1.5mm².