Technische Informationen
| Artikelzustand |
Neu |
| Herstellername |
Photoelectric sensors XU, XUY, ampli for fibre, glass, 12...24 VDC, cable 2 m |
| Marke |
Telemecanique
|
| Kategorien |
Abstandssensoren
|
| Ursprungsland* |
FR |
|
* Das tatsächliche Ursprungsland kann je nach Liefercharge variieren.
Um das konkrete Ursprungsland zu bestätigen, wenden Sie sich bitte an Ihren Kundenbetreuer.
|
| ETIM |
EC002651
|
| Anzahl Halbleiterausgänge mit Meldefunktion |
1 |
| Anzahl kontaktbehafteter Ausgänge mit Meldefunktion |
0 |
| Elektrische Anschlussart |
Radiales Kabel |
| Art des Schaltausgangs |
PNP/NPN |
| Art der Schaltfunktion |
Programmierbar/konfigurierbar |
| Mit Ausblendfunktion |
Nein |
| Analogausgang 0 V ... 10 V |
Nein |
| Analogausgang 0 mA ... 20 mA |
Nein |
| Analogausgang -10 V ... +10 V |
Nein |
| Analogausgang 4 mA ... 20 mA |
Nein |
Verpackungsdetails
| Verpackungsstufe 1 |
3389119009973 |
| Verpackungsstufe 2 |
3389119009971 |
Weitere technische Daten
| Spannungsart |
AC/DC |
| Anzeige |
Sonstige |
| Max. Ausgangsstrom |
40 mA |
| Gehäusematerial |
Kunststoff |
| Umgebungstemperatur |
0-60 °C |
| Mit Zeitfunktion |
Nein |
| Schaltfrequenz |
1000 Hz |
| Bemessungssteuerspeisespannung bei DC |
12-24 V |
| Sicherheitsklasse des Betätigers |
Sicherheitsklasse 0 |
| Einstellverfahren |
Sonstige |
| Gehäusebauart |
Sonderausführung |
| Laserschutzklasse |
Sonstige |
| Leerlaufstrom |
0 mA |
| Lichtart |
Sonstige |
| Nennschaltabstand |
0 mm |
| Material des Kabelmantels |
Sonstige |
| Material des Lichtwellenleiterkerns |
Sonstige |
| Schutzart (IP) |
IP65 |
| AWG-Nummer |
0 |
| Verstärkerbreite |
13 mm |
| Sensordurchmesser |
0 mm |
| Verstärkerhöhe |
30 mm |
| Verstärkerlänge |
60 mm |
Downloads
Beschreibung
This product is part of the XU range, an offer of photoelectric sensors. This photoelectric sensor is a fibre design sensor, fibre acts as a light conductor. Light rays entering the fibre at a certain angle are conveyed to the required location, with minimum loss. The sensitivity adjustment with teach mode. It has 1 normally opened or 1 normally closed programmable, PNP and NPN solid state discrete output. It is furnished with 4-pin M8 male connector for electrical connection. It is an IP65 rated product. It is a photoelectric sensor with a rated supply voltage of 12V to 24V DC with reverse polarity protection, a no-load current consumption of ≤40mA and a switching frequency of