Registrieren Sie sich, um Ihre exklusiven B2B-Preise freizuschalten und mit dem Einkauf zu beginnen. Jetzt registrieren!
Off-delay timer, 1 NO contact 10A image 1

Off-delay timer, 1 NO contact 10A

Nur auf bestellung
EAN: 4010312603048
MPN: 61100704
Verpackung: 1
Nettopreis
38,13 €
pro Einheit
Mindestbestellmenge: 1
Lieferzeit zu unserem Lager: 2-4 weeks
Preis gültig bis 31.12.26 oder solange der Vorrat reicht

Technische Informationen

Artikelzustand Neu
Herstellername Off-delay timer, 1 NO contact 10A
Marke ELTAKO
Kategorien Beschriftungsschilder & Gehäuse
Ursprungsland* CN
* Das tatsächliche Ursprungsland kann je nach Liefercharge variieren. Um das konkrete Ursprungsland zu bestätigen, wenden Sie sich bitte an Ihren Kundenbetreuer.
Code des Harmonisierten Systems 8536 5080 00
ETIM EC001669
Befestigungsart Unterputzmontage (Putz)
Funktion Ansprech- und Rückfallverzögerung
Breite in Teilungseinheiten 0
Anzahl Schalter 0
Art der Versorgungsspannung AC
Versorgungsspannung 250 V
1. Intervalleinheit Minuten/Stunden
2. Intervalleinheit Sekunden/Minuten
1. Intervall 0-12
2. Intervall 1-12
Nennschaltstrom bei 250 V AC 10 A
Schaltvermögen Glühlampen 2000 W
Anzahl Kontakte als Öffner 0
Anzahl Kontakte als Schließer 1

Verpackungsdetails

Verpackungsstufe 1 4010312603048, 4010312603048
Verpackungsstufe 2 4010312603048
Verpackungsstufe 3 4010312603048

Weitere technische Daten

Einbauhöhe 18 mm
Steuerspannung 1 8-230 V
Art der Steuerspannung 1 AC/DC
Frequenz der Steuerspannung 1 50 Hz
Schaltvermögen Leuchtstofflampe DUO 1000 VA
Schaltvermögen Leuchtstofflampe parallelkompensiert 500 VA

Downloads

Beschreibung

1 NO contact not potential free 10A/250V AC. Standby loss 0.7 watt only. Built-in device for installation. 45mm long, 45mm wide, 18mm deep. Zero passage switching to protect contacts and consumers. State-of-the-art hybrid technology combines advantages of nonwearing electronic control with high capacity of special relays. 8 to 230V UC universal control voltage, electrically isolated from the 230V supply voltage and switching voltage. By using a bistable relay coil power loss and heating is avoided even in the on mode. The switched consumer may not be connected to the mains before the short automatic synchronisation after installation has terminated. The top rotary switch varies the off-delay time from 1 to 12 minutes. Operating delay settable from 0 to 12 minutes with the lower rotary switch. Function: When the control contact (light switch) is closed the operating delay AV starts (if not set 0 minutes), on time-out the fan is switched on. The set release delay RV (delay time) starts when the control contact opens and if a set operating delay has elapsed. The fan switches off on time-out. This off-delay timer can be controlled by all dimmer switches EUD12 and EUD61 even in the minimum dimming position.