Technische Informationen
| Artikelzustand |
Neu |
| Herstellername |
MR-SI4 Modbus RTU |
| Marke |
METZ CONNECT
|
| Kategorien |
KNX- & Modbus-Geräte
|
| Ursprungsland* |
DE |
|
* Das tatsächliche Ursprungsland kann je nach Liefercharge variieren.
Um das konkrete Ursprungsland zu bestätigen, wenden Sie sich bitte an Ihren Kundenbetreuer.
|
| Code des Harmonisierten Systems |
8517 6200 00
|
| ETIM |
EC000688
|
| KNX-Bussystem |
Nein |
| Funk-Bussystem |
Nein |
| Powernet-Bussystem |
Nein |
| Mit Buskommunikation |
Ja |
| Sonstige Bussysteme |
Sonstige |
| LON-Bussystem |
Nein |
| KNX-Funk-Bussystem |
Nein |
| Bidirektionaler Funk |
Nein |
Verpackungsdetails
| Verpackungsstufe 1 |
4250184161035, 4250184161035 |
Weitere technische Daten
| Befestigungsart |
DRA (DIN-Schienen-Adapter) |
| Anzahl Eingänge |
4 |
| Breite in Teilungseinheiten |
2 |
| Externe Signalspannung erforderlich |
Nein |
| Steuer-LED |
Ja |
| Schutzart (IP) |
IP20 |
| Mit LED-Anzeige |
Ja |
| Busmodul abnehmbar |
Nein |
| Min. Tiefe der Unterputzdose |
60 mm |
Beschreibung
The Modbus module with 4 S0 inputs to DIN EN 62053-31 class A was developed for decentralized switching tasks. It is suitable for counting S0 counter pulses. This allows very good integration of the module into an energy controlling system. In case of a power failure, the last counter readings are saved. The inputs can be scanned by means of standard registers via a Modbus master. Module address, bit rate and parity are set with two rotary switches on the front or by software. Suitable for decentralized mounting on DIN TH35 rail according to IEC 60715 in electrical distribution cabinets.Connection with screw type terminal blocks