Technische Informationen
| Artikelzustand |
Neu |
| Herstellername |
KNX UNIV. DIMMER 1 EDIT. 500W MAN.BED. |
| Marke |
Schneider Electric
|
| Kategorien |
KNX- & Modbus-Geräte
|
| Ursprungsland* |
DE |
|
* Das tatsächliche Ursprungsland kann je nach Liefercharge variieren.
Um das konkrete Ursprungsland zu bestätigen, wenden Sie sich bitte an Ihren Kundenbetreuer.
|
| Code des Harmonisierten Systems |
8536 4900 00
|
| ETIM |
EC001094
|
| Befestigungsart |
DRA (DIN-Schienen-Adapter) |
| Modell |
Dimmaktor |
| Anzahl Ausgänge |
1 |
| KNX-Bussystem |
Ja |
| Funk-Bussystem |
Nein |
| Powernet-Bussystem |
Nein |
| Sonstige Bussysteme |
Nein |
| Nebenstelleneingang |
Ja |
Verpackungsdetails
| Verpackungsstufe 1 |
3606485011974 |
Weitere technische Daten
| Frequenz |
50-60 Hz |
| Mit Buskommunikation |
Ja |
| Lastart |
Universal |
| Max. Steuerstrom |
0 mA |
| Spannung |
220-230 V |
| Breite in Teilungseinheiten |
4 |
| LON-Bussystem |
Nein |
| Parallelbetrieb möglich |
Nein |
| Lokale Bedienung/Handbedienung |
Ja |
| Ausgangsleistung |
50-500 W |
| Schutzart (IP) |
IP20 |
| Mit LED-Anzeige |
Ja |
| Leistungsanhebung geeignet |
Nein |
| KNX-Funk-Bussystem |
Nein |
| Bidirektionaler Funk |
Nein |
| Busmodul abnehmbar |
Nein |
| Min. Tiefe der Unterputzdose |
0 mm |
| Max. LED-Leistungsanzeige |
0 W |
Beschreibung
Universal dimming actuator has 1 channel 500W/VA with manual override. It has automatic load detection. the actuator can be installed for Installation on DIN rails TH35 according to EN 60715 Each output has Nominal voltage: AC 220 - 230 V, 50 - 60 Hz. Minimum load is 25 W ohmic & 50 VA ohmic/inductive/capacitive. It controls lamps such as incandescent, HV /LV halogen using dimmable wound or electronic transformers. It is able to control different dimming curves and dimming speeds, the same dimming tim. it has short-circuit, open-circuit and excess temperature protection with soft start functio. The device has 4 module width, approximately 72 mm. The color of device is light grey.