Registrieren Sie sich, um Ihre exklusiven B2B-Preise freizuschalten und mit dem Einkauf zu beginnen. Jetzt registrieren!
KNX-RTC FM/PI w.btn.inter.4f TPm pw SysM image 1
KNX-RTC FM/PI w.btn.inter.4f TPm pw SysM image 2
KNX-RTC FM/PI w.btn.inter.4f TPm pw SysM thumbnail 1
KNX-RTC FM/PI w.btn.inter.4f TPm pw SysM thumbnail 2

KNX-RTC FM/PI W.BTN.INTER.4F TPM PW SYSM

Nur auf bestellung
EAN: 4042811092795
MPN: 616819
Verpackung: 1
Nettopreis
245,03 €
pro Einheit
Mindestbestellmenge: 1
Lieferzeit zu unserem Lager: 4-6 weeks
Preis gültig bis 24.12.26 oder solange der Vorrat reicht

Technische Informationen

Artikelzustand Neu
Herstellername KNX-RTC FM/PI w.btn.inter.4f TPm pw SysM
Marke Merten by Schneider Electric
Kategorien KNX- & Modbus-Geräte
Ursprungsland* DE
* Das tatsächliche Ursprungsland kann je nach Liefercharge variieren. Um das konkrete Ursprungsland zu bestätigen, wenden Sie sich bitte an Ihren Kundenbetreuer.
Code des Harmonisierten Systems 9032 1080 00
ETIM EC001101
Montagevorrichtung Basiselement mit Zentralabdeckung
KNX-Bussystem Ja
Funk-Bussystem Nein
Powernet-Bussystem Nein
Mit Buskommunikation Ja
Sonstige Bussysteme Nein
LON-Bussystem Nein
KNX-Funk-Bussystem Nein
Bidirektionaler Funk Nein

Verpackungsdetails

Verpackungsstufe 1 4042811092795

Weitere technische Daten

Befestigungsart Unterputzmontage (Putz)
Farbe Weiß
Oberflächenschutz Unbehandelt
Mit Display Nein
Materialqualität Thermoplast
Anzahl Digitaleingänge 0
Material Kunststoff
Mit Diebstahl-/Demontageschutz Ja
Manuelle Sollwerteinstellung Ja
Parallelbetrieb möglich Nein
Präsenztaste Ja
RAL-Nummer (ähnlich) 9010
Schutzart (IP) IP20
Mit LED-Anzeige Ja
Transparent Nein
Oberflächenausführung Matt
Mit lokaler Bedienung Nein
Temperaturregelklasse IV
Energieverbrauch im Bereitschaftsbetrieb (solstandby) 0 W
Min. Tiefe der Unterputzdose 46 mm

Beschreibung

KNX Room temperature control unit, flush-mounted/PI with 4-gang push-button interface. For System M. The device is a room temperature control unit and a binary input. Depending on the operating mode, the current temperature setpoint value and the room temperature, a control value for the heating or cooling control unit is transmitted to the KNX. The temperature can either be recorded by the internal or the external temperature sensor which must be connected to the push-button interface. The push-button interface generates an internal signal voltage for connecting max. four conventional push-buttons or floating contacts. Of these, two inputs can be used to connect low current LEDs. With integrated bus coupler. The bus is connected using a bus connecting terminal. Functions of the room temperature control unit: Controller type: 2-step control, continuous PI control, switching PI control (PWM). Output: continuous in the range 0 to 100% or switching ON/OFF. Controller mode: Heating with one controller output. Cooling with one controller output. Heating and cooling with separate controller outputs. Heating and cooling with one controller output. 2-step heating with 2 control outputs. 2-step cooling with 2 control outputs. Operating modes: comfort, comfort extension, standby, night economy, frost/heat protection. Operation: Setpoint adjustment can be parameterised in the range with adjusting wheel. Presence push-button functions can be parameterised/switched off. Valve protection, controller disable. Push-button interface functions: Switching, dimming, external blinds, valuator (dimming valuator, extension unit for light scenes with/without memory function, temperature valuator, brightness valuator). Push-button interface: up to 4 inputs, 2 of which can be used as outputs and one for connecting the remote sensor. Output voltage: 5 V (SELV). Output current: max. 0.8 mA. Max. cable length: Inputs/outputs max. 5 m, remote sensor max. 50 m. Material: thermoplastic classy matt. Colour: polar white.