Technische Informationen
| Artikelzustand |
Neu |
| Herstellername |
KNX heating input REG-K/ 6x230 /0.16 A, light grey |
| Marke |
Schneider Electric
|
| Kategorien |
KNX- & Modbus-Geräte
|
| Ursprungsland* |
DE |
|
* Das tatsächliche Ursprungsland kann je nach Liefercharge variieren.
Um das konkrete Ursprungsland zu bestätigen, wenden Sie sich bitte an Ihren Kundenbetreuer.
|
| ETIM |
EC001586
|
| Befestigungsart |
DRA (DIN-Schienen-Adapter) |
| Anzahl Ausgänge |
6 |
| Max. Ausgangsstrom |
0.05 A |
| KNX-Bussystem |
Ja |
| Funk-Bussystem |
Nein |
| Sonstige Bussysteme |
Nein |
| Stellgröße stetig |
Ja |
| Stellgröße schaltend |
Ja |
| Ventilschutzfunktion |
Ja |
| Handschalter |
Ja |
Verpackungsdetails
| Verpackungsstufe 1 |
3606480768996 |
| Verpackungsstufe 2 |
3606480768994 |
Weitere technische Daten
| Max. Schaltstrom (ohmsche Last) |
0.05 A |
| Powernet-Bussystem |
Nein |
| Mit Buskommunikation |
Ja |
| Anzahl Digitaleingänge |
0 |
| Breite in Teilungseinheiten |
4 |
| LON-Bussystem |
Nein |
| Schaltspannung |
24-230 V |
| Schutzart (IP) |
IP20 |
| KNX-Funk-Bussystem |
Nein |
| Bidirektionaler Funk |
Nein |
| Busmodul abnehmbar |
Nein |
| Min. Tiefe der Unterputzdose |
0 mm |
Beschreibung
The heating actuator has 6 thermoelectric valve drives for heating or cooling. Up to 4 valve drives can be connected to each output. The outputs are either switch activated (1 bit) or PWM signal (1 byte) activated. All outputs can be operated manually using push-button operation. Nominal voltage is AC 110-230 V, 50/60 Hz. Outputs are electronic AC 24 V / 230 V. Nominal current: 0.05-0.16 A. the actuator can be installed for Installation on DIN rails TH35 according to EN 60715 it has many software features such as Characteristics of valve drive (open/closed), PWM cycle time per channel, valve protection function per channel, etc. The device has 84module width, approximately 72 mm. The color of device is light grey.