Registrieren Sie sich, um Ihre exklusiven B2B-Preise freizuschalten und mit dem Einkauf zu beginnen. Jetzt registrieren!
Wireless single-phase energy meter
Nur auf bestellung
EAN: 4010312311059
MPN: 30000308
Verpackung: 1
Nettopreis
81,82 €
pro Einheit
Mindestbestellmenge: 1
Lieferzeit zu unserem Lager: 2-4 weeks
Preis gültig bis 31.12.26 oder solange der Vorrat reicht
Technische Informationen
| Artikelzustand | Neu |
| Herstellername | Wireless single-phase energy meter |
| Marke | ELTAKO |
| Kategorien |
KNX- & Modbus-Geräte
|
| Ursprungsland* | CN |
| * Das tatsächliche Ursprungsland kann je nach Liefercharge variieren. Um das konkrete Ursprungsland zu bestätigen, wenden Sie sich bitte an Ihren Kundenbetreuer. | |
| Code des Harmonisierten Systems | 8526 9200 00 |
| ETIM | EC001102 |
| Modell | Sonstige |
| Anschlussart | Gerade |
| S0-Impulsschnittstelle | Nein |
| Genauigkeitsklasse | 1 |
Verpackungsdetails
| Verpackungsstufe 1 | 4010312311059, 4010312311059 |
| Verpackungsstufe 2 | 4010312311059 |
| Verpackungsstufe 3 | 4010312311059 |
Weitere technische Daten
| KNX-Bussystem | Nein |
| Funk-Bussystem | Ja |
| Powernet-Bussystem | Nein |
| Tarifumschalter | Nein |
| Blindleistung | Nein |
| PTB-zugelassen | Nein |
| Sonstige Bussysteme | Nein |
| LON-Bussystem | Nein |
| KNX-Funk-Bussystem | Nein |
| Bidirektionaler Funk | Nein |
Downloads
Beschreibung
Wireless single-phase energy meter, maximum current 65A. Only 0.5 watt standby loss. Modular device for DIN-EN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. This single-phase energy meter measures active energy by means of the current between input and output and transmits the current power and meter reading over the Eltako wireless network. Accuracy class B (1%). Evaluation and smart link via Smart Home-Controller. The internal power consumption of max. 0.5 watt active power is not metered. Like all meters without declaration of conformity (e.g. MID), this meter is not permitted for billing. 1 phase conductor with a max. current up to 65A can be connected. If the anticipated load exceeds 50%, maintain an air gap of ½ pitch unit to the devices mounted adjacently. If necessary, use spacer DS12. The inrush current is 40mA. The consumption is saved to a non-volatile memory and is immediately available again after a power failure. Wireless telegrams: A telegram is transmitted within 60 seconds if the power status changes by min. 10 percent. A change in meter reading is transmitted immediately. A full telegram comprising meter reading and power status is transmitted every 10 minutes. When the power supply is switched on, a teach-in telegram is sent to teach in the associated energy consumption indicator. If the L input and the L output were interchanged when hooked up, a normal rate (HT)/off-peak (NT) switchover telegram is transmitted to indicate the hook-up error.