Registrieren Sie sich, um Ihre exklusiven B2B-Preise freizuschalten und mit dem Einkauf zu beginnen. Jetzt registrieren!
Transmitter module with batteries
Nur auf bestellung
EAN: 4010312316092
MPN: 30000459
Verpackung: 1
Nettopreis
65,89 €
pro Einheit
Mindestbestellmenge: 1
Lieferzeit zu unserem Lager: 2-4 weeks
Preis gültig bis 31.12.26 oder solange der Vorrat reicht
Technische Informationen
| Artikelzustand | Neu |
| Herstellername | Transmitter module with batteries |
| Marke | ELTAKO |
| Kategorien |
Schalter & Taster
|
| Ursprungsland* | CN |
| * Das tatsächliche Ursprungsland kann je nach Liefercharge variieren. Um das konkrete Ursprungsland zu bestätigen, wenden Sie sich bitte an Ihren Kundenbetreuer. | |
| Code des Harmonisierten Systems | 8526 9200 00 |
| ETIM | EC001358 |
| Reichweite | 30 m |
| Unterputz-Funksender | Nein |
| Aufputz-Funksender | Nein |
| Funkfrequenz | 868 MHz |
| Mit Handsender | Nein |
| Schutzart (IP) | IP20 |
Verpackungsdetails
| Verpackungsstufe 1 | 4010312316092, 4010312316092 |
| Verpackungsstufe 2 | 4010312316092 |
| Verpackungsstufe 3 | 4010312316092 |
Weitere technische Daten
| Stromversorgung | Batterie |
| Rolling-Code-System | Nein |
| Anzahl Befehle | 1 |
| Tastatur-Schutzabdeckung | Nein |
| Mit Funkcodiergerät | Nein |
Downloads
Beschreibung
Wireles transmitter module with batteries and antenna rod. LxWxH: 60x46x30mm (dimensions excluding antenna and fixing screws). This wireless transmitter module can be operated by a water sensor FWS60 or a pushbutton and transmits a variety of adjustable wireless telegrams to the Eltako building wireless system. An internal jumper permits selection between 4 operating modes. In mode 1 (jumper plugged at Position JP1) wireless telegrams is sent from a wireless pushbutton, such as Press double rocker at bottom left. In mode 2 (jumper plugged at Position 2) wireless telegrams is sent from a wireless pushbutton, such as Press double rocker at top right and bottom right. In mode 3 (jumper plugged at Position 3, factory setting) wireless telegrams is sent to EnOcean Standard EEP A5-30-03. In mode 4 (jumper plugged at Position 4) wireless telegrams is sent to EnOcean Standard EEP A5-30-01. In modes 3 and 4 a status telegram is also sent every 33 minutes. The power supply that lasts several years is provided by an internal 3V button cell CR2032. The charge status of the battery is transmitted in every data and status telegram in mode 4. Press the internal LRN button to teach in the actuator which is ready for teach-in. Release two screws on the front to remove the cover. When closing, make sure the seal is in the correct position. An M12 screw is located on the underside to connect the cable. It is not permitted to activate several wireless transmitter modules at the same time.