Registrieren Sie sich, um Ihre exklusiven B2B-Preise freizuschalten und mit dem Einkauf zu beginnen. Jetzt registrieren!
1- and 2-level wireless repeater
Nur auf bestellung
EAN: 4010312306482
MPN: 30000352
Verpackung: 1
Nettopreis
85,59 €
pro Einheit
Mindestbestellmenge: 1
Lieferzeit zu unserem Lager: 2-4 weeks
Preis gültig bis 31.12.26 oder solange der Vorrat reicht
Technische Informationen
| Artikelzustand | Neu |
| Herstellername | 1- and 2-level wireless repeater |
| Marke | ELTAKO |
| Kategorien |
KNX- & Modbus-Geräte
|
| Ursprungsland* | CN |
| * Das tatsächliche Ursprungsland kann je nach Liefercharge variieren. Um das konkrete Ursprungsland zu bestätigen, wenden Sie sich bitte an Ihren Kundenbetreuer. | |
| Code des Harmonisierten Systems | 8526 9200 00 |
| ETIM | EC000698 |
| Bemessungsspannung | 230 V |
| Befestigungsart | Aufputzmontage (Putz) |
| KNX-Bussystem | Nein |
| Powernet-Bussystem | Nein |
| Sonstige Bussysteme | Nein |
| LON-Bussystem | Nein |
Verpackungsdetails
| Verpackungsstufe 1 | 4010312306482, 4010312306482 |
| Verpackungsstufe 2 | 4010312306482 |
| Verpackungsstufe 3 | 4010312306482 |
Weitere technische Daten
| Funk-Bussystem | Ja |
| Schutzart (IP) | IP20 |
| KNX-Funk-Bussystem | Nein |
Downloads
Beschreibung
1 and 2 level wireless repeater with small antenna and with antenna FA250. Only 0.6 watt standby loss. A wireless antenna FA250 is connectable as required. Mounting in the 230V power supply cord, e.g. in false ceilings. 100mm long, 50mm wide and 25mm deep. This repeater is only needed if the building conditions prevent undisturbed reception or the distance between the wireless pushbutton and receiver is too great. Antenna FA250 with 250cm cable is connectable instead of the enclosed antenna. The range can be extended considerably by placing it in the optimum position. The 1-level mode is activated ex works. Only wireless signals from sensors are received, tested and retransmitted at full transmit power. Wireless signals from other repeaters are ignored to reduce the data volume. Use the rotary switch to switch over to 2 level mode. Then the wireless signals from sensors and from another 1 level repeater are processed. A signal may therefore be received and amplified twice. The LED indicates incoming wireless signals by flashing briefly. Wireless repeaters need not be taught-in. They receive and amplify signals from all wireless sensors within their reception area.