Registrieren Sie sich, um Ihre exklusiven B2B-Preise freizuschalten und mit dem Einkauf zu beginnen. Jetzt registrieren!
Self-learning mains disconnection relay, 1 NO contact 16A
Nur auf bestellung
EAN: 4010312203255
MPN: 22100231
Verpackung: 1
Nettopreis
48,84 €
pro Einheit
Mindestbestellmenge: 1
Lieferzeit zu unserem Lager: 4-6 weeks
Dieser Preis gilt bis zur nächsten Preisliste oder solange der Vorrat reicht
Technische Informationen
| Artikelzustand | Neu |
| Herstellername | Self-learning mains disconnection relay, 1 NO contact 16A |
| Marke | ELTAKO |
| Kategorien |
Hauptschalter
|
| Ursprungsland* | CN |
| * Das tatsächliche Ursprungsland kann je nach Liefercharge variieren. Um das konkrete Ursprungsland zu bestätigen, wenden Sie sich bitte an Ihren Kundenbetreuer. | |
| Code des Harmonisierten Systems | 8536 5080 00 |
| ETIM | EC001651 |
| Bemessungsstrom | 10 A |
| Bemessungsspannung | 230 V |
| Nennfrequenz | 50 Hz |
| Einschaltspitzenstrom | 20 mA |
| Spannungsüberwachung | DC |
Verpackungsdetails
| Verpackungsstufe 1 | 4010312203255, 4010312203255 |
| Verpackungsstufe 2 | 4010312203255 |
| Verpackungsstufe 3 | 4010312203255 |
Weitere technische Daten
| Befestigungsart | DIN-Schiene |
| Einbautiefe | 26 mm |
| Breite in Teilungseinheiten | 3 |
| Max. Schaltstrom (cos phi = 0,6) | 16 A |
| Max. Glühlampenlast | 2300 W |
| Max. Leuchtstofflampenlast | 500 VA |
| Max. Leuchtstofflampenlast (Doppelschaltung) | 1000 VA |
| Max. Leuchtstofflampenlast (parallel kompensiert) | 500 VA |
| Schutzart (IP) | IP20 |
Downloads
Beschreibung
1 NO contact not potential free 16A/250V AC. Self-learning. 230V LED lamps up to 200W, incandescent lamp load 2300W. Standby loss 0.8 watt only. Modular device for DIN EN 60715 TH35 rail mounting. 1 module = 18mm wide and 58mm deep. 230V supply voltage and switching voltage. State-of-the-art hybrid technology combines advantages of nonwearing electronic control with high capacity of special relays. The FR12-230V mains disconnection relay disconnects the power supply once all series connected loads are turned off, thus preventing any electromagnetic interference fields from occurring. Small loads up to 200mA, are acceptable and, once major loads are disconnected, they do not prevent field disconnection. The limit is taught-in automatically by the FR12 using a patented method so you need not set the limit manually. Loads drawing more than 200mA are consistently defined as loads which should cause the line power to be connected. As long as no major load is turned on, one pole of the monitored circuit remains isolated from the mains. Neutral and earth are connected continuously to avoid acting as an aerial. A DC voltage with an extremely low residual ripple is applied for monitoring. Therefore, it is prohibited to bridge the relay contact, which would ultimately cause device failure. When a load is turned on, the mains disconnection switch connects the monitored phase after approx. 1 sec and the LED lights red.