Technische Informationen
| Artikelzustand |
Neu |
| Herstellername |
Window contact with reed relay. 1 NC contact 5VA/175V UC |
| Marke |
ELTAKO
|
| Kategorien |
Schalter & Taster
|
| Ursprungsland* |
US |
|
* Das tatsächliche Ursprungsland kann je nach Liefercharge variieren.
Um das konkrete Ursprungsland zu bestätigen, wenden Sie sich bitte an Ihren Kundenbetreuer.
|
| Code des Harmonisierten Systems |
8536 5080 00
|
| ETIM |
EC001358
|
| Reichweite |
30 m |
| Unterputz-Funksender |
Nein |
| Aufputz-Funksender |
Nein |
| Funkfrequenz |
868 MHz |
| Mit Handsender |
Nein |
| Schutzart (IP) |
IP20 |
Verpackungsdetails
| Verpackungsstufe 1 |
4010312903001, 4010312903001 |
| Verpackungsstufe 2 |
4010312903001 |
| Verpackungsstufe 3 |
4010312903001 |
Weitere technische Daten
| Stromversorgung |
Sonstige |
| Rolling-Code-System |
Nein |
| Anzahl Befehle |
2 |
| Tastatur-Schutzabdeckung |
Nein |
| Mit Funkcodiergerät |
Nein |
Downloads
Beschreibung
Window contact with reed relay. 1 NC contact, switching capacity 5W or VA. Switching voltage max. 175V UC. The enclosed window contact consists of a Reed relay with terminals and a solenoid. The NC contact opens when the solenoid approaches closer than 25mm. The disconnection relay ETR61NP is connected to terminals T1 and T2. Power supply to the extractor only cuts in when the window is open. ETR61NP can be wired in the flush mounted socket behind the socket for the extractor. Mounting the window contact FK: Lever out the inserts at the narrow end of the housing. Wire up the Reed relay and cut out the cable entry on the housing. Affix the two housings in parallel maximum 15mm apart and also screw if necessary. In the longitudinal direction the solenoid may be twisted in any direction compared to the Reed relay.