Registrieren Sie sich, um Ihre exklusiven B2B-Preise freizuschalten und mit dem Einkauf zu beginnen. Jetzt registrieren!
1- and 2-level outdoor wireless repeater
Nur auf bestellung
EAN: 4010312310137
MPN: 30000353
Verpackung: 1
Nettopreis
72,40 €
pro Einheit
Mindestbestellmenge: 1
Lieferzeit zu unserem Lager: 2-4 weeks
Preis gültig bis 31.12.26 oder solange der Vorrat reicht
Technische Informationen
| Artikelzustand | Neu |
| Herstellername | 1- and 2-level outdoor wireless repeater |
| Marke | ELTAKO |
| Kategorien |
KNX- & Modbus-Geräte
|
| Ursprungsland* | CN |
| * Das tatsächliche Ursprungsland kann je nach Liefercharge variieren. Um das konkrete Ursprungsland zu bestätigen, wenden Sie sich bitte an Ihren Kundenbetreuer. | |
| Code des Harmonisierten Systems | 8526 9200 00 |
| ETIM | EC000698 |
| Bemessungsspannung | 230 V |
| Befestigungsart | Aufputzmontage (Putz) |
| KNX-Bussystem | Nein |
| Powernet-Bussystem | Nein |
| Sonstige Bussysteme | Nein |
| LON-Bussystem | Nein |
Verpackungsdetails
| Verpackungsstufe 1 | 4010312310137, 4010312310137 |
| Verpackungsstufe 2 | 4010312310137 |
| Verpackungsstufe 3 | 4010312310137 |
Weitere technische Daten
| Funk-Bussystem | Ja |
| Schutzart (IP) | IP54 |
| KNX-Funk-Bussystem | Nein |
Downloads
Beschreibung
Outside wireless repeater 1 and 2 levels, 60x46mm, 30mm deep. Only 0.7 watt standby loss. Supply voltage 230V. This repeater is only needed if the building conditions prevent undisturbed reception or the distance between the wireless pushbutton and receiver is too great. The 1-level mode is activated ex works. Only the signals from sensors and actuators are received, tested and retransmitted at full transmit power. Wireless signals from other repeaters are ignored to reduce the data volume. Switchover to 2-level mode is carried out by removing the cover (loosen two screws on the front panel) and repositioning the jumper flush right. In this setting, wireless signals from other 1-level repeaters are also processed. A signal may therefore be received and amplified twice. A red LED blinks briefly to indicate all the wireless signals detected. Wireless repeaters need not be taught-in. They receive and amplify signals from all wireless sensors within their reception area. On the underside there is an M12 screw for a waterproof mains connection. The protection class is IP54, the allowable ambient temperature is -20°C to +55°C. For screw mounting.