Registrieren Sie sich, um Ihre exklusiven B2B-Preise freizuschalten und mit dem Einkauf zu beginnen. Jetzt registrieren!
Isolating relay with window contact, 1 NO contact 10A
Nur auf bestellung
EAN: 4010312205495
MPN: 61100631
Verpackung: 1
Nettopreis
52,62 €
pro Einheit
Mindestbestellmenge: 1
Lieferzeit zu unserem Lager: 2-4 weeks
Preis gültig bis 31.12.26 oder solange der Vorrat reicht
Technische Informationen
| Artikelzustand | Neu |
| Herstellername | Isolating relay with window contact, 1 NO contact 10A |
| Marke | ELTAKO |
| Kategorien |
Schalt- & Steuergeräte
Licht- & Rollladensteuerungen |
| Ursprungsland* | CN |
| * Das tatsächliche Ursprungsland kann je nach Liefercharge variieren. Um das konkrete Ursprungsland zu bestätigen, wenden Sie sich bitte an Ihren Kundenbetreuer. | |
| Code des Harmonisierten Systems | 8536 4900 00 |
| ETIM | EC001593 |
| Bemessungsspannung | 230 V |
| Befestigungsart | Sonstige |
| Anzahl anschließbarer Motoren | 1 |
| Nebenstelleneingang | Nein |
Verpackungsdetails
| Verpackungsstufe 1 | 4010312205495, 4010312205495 |
| Verpackungsstufe 2 | 4010312205495 |
| Verpackungsstufe 3 | 4010312205495 |
Weitere technische Daten
| Frequenz | 50 Hz |
| Zentraleingang | Ja |
Downloads
Beschreibung
1 NO contact not potential free 10A/250V AC. 230V LED lamps up to 100W, incandescent lamp load 2000W. With window contact. Standby loss 0.5 watt only. For installation. 45mm long, 45mm wide, 18mm deep. State-of-the-art hybrid technology combines advantages of nonwearing electronic control with high capacity of special relays. Control input with internally produced low voltage 24V DC. With an isolating transformer electrically isolated from power supply and make contact (PELV). Therefore no external low voltage power supply necessary. With 2 L terminals and 2 N terminals for an easy and quick installation. Power supply 230V. The enclosed window contact consists of a Reed relay with terminals and a solenoid. The NC contact opens when the solenoid approaches closer than 25mm. The disconnection relay ETR61NP is connected to terminals T1 and T2. Power supply to the extractor only cuts in when the window is open. ETR61NP can be wired in the flush mounted socket behind the socket for the extractor. Mounting the window contact FK: Lever out the inserts at the narrow end of the housing. Wire up the Reed relay and cut out the cable entry on the housing. Affix the two housings in parallel maximum 15mm apart and also screw if necessary. In the longitudinal direction the solenoid may be twisted in any direction compared to the Reed relay.