Technische Informationen
| Artikelzustand |
Neu |
| Herstellername |
DEHNguard S surge arrester |
| Marke |
Dehn
|
| Kategorien |
Überspannungsschutzgeräte (SPD)
|
| Ursprungsland* |
DE |
|
* Das tatsächliche Ursprungsland kann je nach Liefercharge variieren.
Um das konkrete Ursprungsland zu bestätigen, wenden Sie sich bitte an Ihren Kundenbetreuer.
|
| Code des Harmonisierten Systems |
8536 3030 00
|
| ETIM |
EC000941
|
| Spannungsschutzpegel |
1.1 kV |
| Nennableitstoßstrom (8/20 µs) |
10 kA |
| Nennspannung AC |
60 V |
| Nennspannung DC |
100 V |
| Schutzart (IP) |
IP20 |
| TN-Systemkonfiguration |
Ja |
| TN-C-S-Systemkonfiguration |
Ja |
Verpackungsdetails
| Verpackungsstufe 1 |
4013364127296, 4013364127296 |
Weitere technische Daten
| Befestigungsart |
DIN-Schiene (Hutschiene), 35 mm |
| Anzahl Leiter (ohne Schutzleiter) |
1 |
| Baugröße |
1 Modulabstand |
| Max. Dauerspannung AC |
75 V |
| Kategorie Typ 2 |
Ja |
| Signalisierung am Gerät |
Optisch |
| Max. Dauerspannung DC |
100 V |
| Max. Leiterquerschnitt starr (ein-/mehrdrähtig) |
35 mm² |
| Max. Leiterquerschnitt flexibel (feindrähtig) |
25 mm² |
| TN-C-Systemkonfiguration |
Ja |
| TN-S-Systemkonfiguration |
Ja |
| TT-Systemkonfiguration |
Ja |
| Max. Ableitstoßstrom (8/20 µs) |
20 kA |
| Kurzschlussausschaltvermögen (Isccr) |
25 kA |
| Max. Überstromschutzeinrichtung, Parallelschaltung (Sicherung) |
100 A |
Downloads
Beschreibung
Single-pole DEHNguard S VA surge arrester (type 2 according to EN 61643-11) consisting of a base part and plug-in protection module. High reliability due to Thermo Dynamic Control SPD monitoring device. For protecting low-voltage consumer´s installations against surges. For installation in conformity with the lightning protection zone concept at the boundaries from 0B – 1 and higher.