Technische Informationen
| Artikelzustand |
Neu |
| Herstellername |
DEHNgap C S, N-PE surge arrester |
| Marke |
Dehn
|
| Kategorien |
Überspannungsschutzgeräte (SPD)
|
| Ursprungsland* |
DE |
|
* Das tatsächliche Ursprungsland kann je nach Liefercharge variieren.
Um das konkrete Ursprungsland zu bestätigen, wenden Sie sich bitte an Ihren Kundenbetreuer.
|
| Code des Harmonisierten Systems |
8536 3030 00
|
| ETIM |
EC000941
|
| Spannungsschutzpegel |
1.5 kV |
| Nennableitstoßstrom (8/20 µs) |
20 kA |
| Schutzart (IP) |
IP20 |
Verpackungsdetails
| Verpackungsstufe 1 |
4013364108530, 4013364108530 |
Weitere technische Daten
| Befestigungsart |
DIN-Schiene (Hutschiene), 35 mm |
| Anzahl Leiter (ohne Schutzleiter) |
1 |
| Baugröße |
1 Modulabstand |
| Max. Dauerspannung AC |
255 V |
| Kategorie Typ 2 |
Ja |
| Signalisierung am Gerät |
Optisch |
| Max. Leiterquerschnitt starr (ein-/mehrdrähtig) |
35 mm² |
| Max. Leiterquerschnitt flexibel (feindrähtig) |
25 mm² |
| TT-Systemkonfiguration |
Ja |
| Max. Ableitstoßstrom (8/20 µs) |
40 kA |
Downloads
Beschreibung
Single-pole DEHNgap C S N-PE surge arrester (type 2 according to EN 61643-11) consisting of a base part and plug-in protection module. Specifically designed for use in 3+1 and 1+1 circuits of TT systems according to IEC 60364-5-53 between neutral conductor N and protective conductor PE. For protecting low-voltage consumer´s installations against surges. For installation in conformity with the lightning protection zone concept at the boundaries from 0B – 1 and higher.