Technische Informationen
| Artikelzustand |
Neu |
| Herstellername |
Comb. arr. Type 1+2 DEHNshield ZP Basic for three-phase TT and TN-S sy |
| Marke |
Dehn
|
| Kategorien |
Überspannungsschutzgeräte (SPD)
|
| Ursprungsland* |
DE |
|
* Das tatsächliche Ursprungsland kann je nach Liefercharge variieren.
Um das konkrete Ursprungsland zu bestätigen, wenden Sie sich bitte an Ihren Kundenbetreuer.
|
| Code des Harmonisierten Systems |
8536 3090 00
|
| ETIM |
EC001457
|
| Blitzimpulsstrom (10/350 µs) |
30 kA |
| Max. Dauerspannung AC |
255 V |
| Nennspannung AC |
230 V |
| Prüfklasse |
Typ 1 + 2 |
| Spannungsschutzpegel L-N |
1.5 kV |
| Schutzart (IP) |
IP30 |
| Spannungsschutzpegel N-PE |
1.5 kV |
Verpackungsdetails
| Verpackungsstufe 1 |
4013364306783, 4013364306783 |
Weitere technische Daten
| Befestigungsart |
Sammelschiene |
| Polzahl |
4 |
| Baugröße |
3 Modulabstände |
| Folgestromlöschvermögen |
25 kA |
| Signalisierung am Gerät |
Optisch |
| Spezifische Energie (W/R) |
225 kJ/Ohm |
| Energiekoordiniertes Schutzvermögen für Endgeräte |
Ja |
| TN-S-Systemkonfiguration |
Ja |
| TT-Systemkonfiguration |
Ja |
Downloads
Beschreibung
DEHNshield ZP Basic multipole spark-gap-based combined lightning current and surge arrester type 1 + type 2 according to EN 61643-11. Can be directly snapped onto a 40 mm busbar system in the meter panel without tools. Capable of protecting terminal equipment. For protecting low-voltage consumer´s installations against surges and even direct lightning strikes. Fulfils all requirements of IEC 60364-5-53. Can be directly installed at the infeed of the electrical installation in the residential building.